Table of Contents
Advertisement
ENGLISH
14
Measuring and programming water hardness
Measuring water hardness is very important for de ning the frequency in
which the machine has to be descaled and to install the "INTENZA+" water
lter (for more detail on the water lter see next chapter).
To measure the water hardness follow the steps below:
1
Immerse the water hardness tester strip (supplied with the machine) in
water for 1 second.
Note:
The tester strip can only be used for one measurement.
2
Wait for one minute.
3
Check how many squares have changed the colour to red and then
consult the table.
Note:
The numbers on the water hardness tester strip correspond to the water
hardness adjustment settings.
More precisely:
1 = 1 (very soft water)
2 = 2 (soft water)
3 = 3 (hard water)
4 = 4 (very hard water)
The letters correspond to the references that are located at the base of the
"INTENZA+" water lter (see next chapter).
4
Now you can program the water hardness setting. Press the "
button and scroll the pages by pressing the "
lowing icon is displayed.
Note:
The machine is supplied with standard water hardness setting, suitable for
most types of water.
5
Press the "
" button to increase the value or the "
decrease the value.
6
Press the "
" button to con rm the setting.
"
" button until the fol-
" button to
Advertisement
Table of Contents
