Features - Epson LG1-1070 Service Manual

1.1 FEATURES

The LQ-570/1070 are small, light-weight, low-cost, printers with advanced paper handling that is
compatible with the LQ-510/550/1010. The printer's main features are as follows:
Ability to print multi-point fonts
Ability to receive and print raster graphic images
Compatibility with the LQ/SQ series available on the market
252 cps (draft, 12 cpi)
210 cps (draft, 10 cpi)
84 cps (LQ, 12 cpi)
64 cps (LQ, 10 cpi)
l
Optional interface card
l
Clear, easy-to-read printing with standard EPSON fonts
9 LQ fonts (Roman, Sans Serif, Courier, Prestige, Script, OCR-B, Script C, Orator, Orator-S)
1 draft font
l
Flexible handling of continuous paper
Three ways to insert continuous paper (front/bottom/rear path)
Auto backout and
Use of continuous paper without removing CSF
Attachment of standard tractor unit in either of two positions (push/pull)
Two ways to insert cut sheets (front/top)
Auto loading
The LQ-570/1070 are equipped with the standard EPSON 8-bit parallel interface. Various interface
options ensure compatibility with a wide variety of computers. Table l-l lists the interface options,Table
1-2 lists the optional units available for the LQ-570/1070, and Figure l-l shows an exterior view of
the LQ-570/1070.
Printing is not possible for the following baud rates : 1800, 200, 134.5, 1 10, 75 bps.
NOTE: Refer to the "Optional Interface Technical Manual" for details.
auto loading (rear insertion)
Table l-l. Interface Options
Model
C823051 Serial interface card
C823061 Serial interface
C823071 32KB serial interface card
32KB serial interface card (milli screw)
C823081
C823101
32KB parallel interface card
C823131 32KB IEEE-488 interface card
Description
(inch screw)
card
(milli screw)
(inch screw)
1-1
REV.-B