Epson LG1-1070 Service Manual page 151

Table 1-4.
NOTES:
Printing on envelopes is available only at normal temperatures and only using top insertion.
the left edge of a No. 6 envelope at the sheet guide setting mark.
NOTES:
the tractor holes. The total thickness must be less than or equal to 0.3 mm (0.01 18 in.).
Labels can be printed out only if the temperature is between 5 and 35 degrees C (41 and
. 95 degrees F) and humidity is between 10 % and 80 % RH.
for
Specifications Cut
257 mm to 297 mm (10.1 in. to 11.7 in.)
0.065 mm to 0.14 mm (0.0025 in. to 0.0055 in.)-single sheet
0.12 mm to 0.32 mm (0.0047 in. to 0.012 in.)- total
17 lb to 24 lb (52.3 g/m2 to 90 g/mZ)-single sheet
12 lb to 15 lb (40 g/m* to 58 g/m*) - each
Carbonless duplicating paper
4 sheets (1 original and 3 copies)
Table 1-5. Specifications for Continuous Paper
101 mm to 254 ('406) mm (4.0 in. to 10.0 ("16) in.)
0.065 mm to 0.10 mm (0.0025 in. to 0.0039 in.)-single sheet
0.065 mm to 0.32 mm (0.0025 in. to 0.012 in.) - total
14 lb to 22 lb (52.3 g/m* to 82 g/m2) - single sheet
12 lb to 15 lb (40 g/m2 to 58 g/m*) - each
Standard paper or carbonless duplicating paper
Recycled paper (at normal temperatures)
4 sheets (1 original and 3 copies)
Table l-6. Envelopes
No. lO= 240 mm X 104 mm
0.16 mm to 0.52 mm (0.0063 in. to 0.0 197 in.)
Differences in thickness within the printing area must be less than
0.25 mm (0.0098 in.)
12 lb to 24 lb (40 g/m2 to 9 1 g/m2)
Bond paper, standard paper, airmail
Not available
Table 1-7. Label Specifications
2 l/2 in. X 15/16 in.
4 in. X 15/16 in.
4 in. X 1 7/16 in.
Not available
0.07 mm to 0.09 mm (0.0028 in. to 0.003 1 in.) - base paper
0.16 mm to 0.19 mm (0.0063 in. to 0.0075 in.)- total
AVERY MINI-LINE LABELS
Sheets (Carbonless Duplicating Paper)
tractor (front or bottom).
1-5
REV.-B