Jumper Differences; Weight Difference For Cut Sheet Carbonless Duplicating Paper; Power Consumption - Epson LG1-1070 Service Manual

Appendix B

Jumper Differences

LQ-570+/1070+
When jumper 512 is connected to SLIN, the printer recognizes the SELECT IN
signal the host.
LQ-570/1070
When jumper 53 is connected to GND, the SLCT-IN signal is fixed to LOW.
Printer Weight Difference
LQ-570+/1070+
lb. (6.8 kg)/20 lb. (9.5 kg)
15
Printer Height Difference
LQ-570+11070+
6.3 inches

Weight Difference for Cut Sheet Carbonless Duplicating Paper

LQ-570+/1070+
12 to 15 lb paper, maximum
Lower Noise
LQ-570+11070+
46.5 dB(A)

Power Consumption

LQ-570+/1070+
33 W/36W
(during a self-test in draft mode at 10 cpi)
Mean Cycles Between Failures (MCBF)
LQ-570+/1070+
3 million lines, excluding printhead (same as LQ-570/1070)
Differences in Power On Function with Buttons Held Down
Button
LQ-570
Prints PROM version, DIP switch
settings, rotating pattern of LQ fonts
LOAD/ Prints PROM version, DIP switch
EJECT
settings, draft font pattern
ALT No function
B-4
LQ-570/1070
13.5 lb. (6.1 kgY18.6 lb. (8.4 kg)
LQ-570/1070
6 inches
LQ-570/1070
17 to 24 lb., maximum
LQ-570/1070
55 B(A)
LQ-570/1070
3 3 w
LQ-570/1070+
Prints rotating pattern of LQ fonts
Prints draft font pattern
Prints PROM version and DIP
switch settings and ejects page
Epson LQ-570+/1 070+