Epson LG1-1070 Service Manual page 163

(7) FONT Button
Pressing this button selects a font, and
FONT LED indicates the currently selected font.
(8) CONDENSED Button
Pressing this button toggles the printing mode between normal and condensed, alternatively.
NOTE: Selections of the FONT and CONDENSED buttons are stored as defaults, so that the last FONT
and the CONDENSED selection become effective when the printer is initialized.
INDICATORS
(1) OPERATE (green)
Lit when the printer's OPERATE button is on, and AC power is supplied.
(2) PAUSE (orange)
Lit when the printer is in PAUSE mode (no printing, no paper feeding, and not accepting data).
(3) TEAR-OFF (orange)
Lit when the sheet is advanced to the tear-off position.
(4) DATA (orange)
Lit when the printer has received data from the host.
(5) PAPER-OUT (red)
Lit when the paper-out detector senses no paper. Refer to Section 1.6.3, Paper-out Detection and Forms
Override Function.
(6) MULTI-PART (green)
Lit when the adjust lever is positioned at the 4th step or higher.
(7) BIN 1 (green)
Lit when bin 1 is selected.
(8) BIN 2 (green)
Lit when bin 2 is selected
(9) FONT (green) - Draft, Courier, Roman, Sans Serif, Prestige, Script, Script C, Orator, Orator-S, OCR-B
These indicators show the currently selected font.
(10) CONDENSED (green)
Lit when condensed mode is selected.
it continuously selects the next one, sequentially. The
1-17
REV.-A