Epson LG1-1070 Service Manual page 150

REV.-B
l
Use the paper tension unit.
2. Push tractor feed (release lever in REAR PUSH POSITION).
l Since accuracy of paper feed cannot be assured after the paper end has been detected, please
do not perform reverse feeding after detection of a paper end.
3. Push-pull tractor feed (release lever in REAR PUSH POSITION).
4. Pull tractor feed (release lever in PULL POSITION).
l
Release the friction-feed mechanism.
l
Paper for copies must be a carbonless multi-part paper.
l
Do not perform reverse feeds.
Paper specifications
Table l-3. Specifications for Cut Sheets (One-Part Paper)
See tables l-3, l-4, 1-5, l-6, and l-7
148 mm to 257 ("420) mm (5.8 in. to 10.1 (16.5) in.) (top insertion)
364 mm (14.3 in.), maximum
mm to 0.14 mm (0.0025 in. to 0.0055 in.)
14 lb to 24 lb (52.3 g/m2 to 90 g/m?
Standard paper (photocopier paper, etc.)
Recycled paper (at normal temperatures)
1-4