Table of Contents
Advertisement
Inter-Tel EncoreCX
Installation & Maintenance Manual
11. When Pulse Dialing is selected the menu updates to show all equipped lines.
12. Select the lines to be set as "Pulse Dialing".
By default all lines are set to DTMF dialing.
Programming the Line Gain on PRI (ISDN)
When the T1/PRI interface is set for PRI (ISDN) the Line gain is set for the whole interface. It cannot be set for
individual B channels.
1.
From the programming extension, press the PROGRAM key
2.
Press the Scroll Down key (î) until "System Programming" is displayed.
3.
Select "System Programming".
4.
Enter the System Programming Password and select "Lines".
5.
Press the Scroll Down key (î) until "T1 (RBS) or PRI (ISDN)" is displayed.
6.
Select the "PRI (ISDN) option.
7.
Select the "Line Gain" option.
8.
The menu updates to show the available options.
9.
Select either "Low", "Medium" or "High". A solid diamond indicates the current setting.
The default setting is High -3dB.
NOTE: Low is the recommended receive setting as specified in EIA 464C. Medium is the recommended value in
EIA 464B.
NOTE: Low is the recommended receive setting as specified in EIA 464C. Medium is the recommended value in
EIA 464B.
Programming the Line Build-Out for PRI
The Line Build-Out can be set at 0dB, -7.5dB, -15dB or -22dB.
1.
From the programming extension, press the PROGRAM key.
2.
Press the Scroll Down key (î) until "System Programming" is dis played.
3.
Select "System Programming".
4.
Enter the System Programming Password and select "Lines".
5.
Press the Scroll Down key (î) until "T1 (RBS) or PRI (ISDN)" is displayed.
6.
Select the "PRI (ISDN) " option.
7.
Select the "Line Build Out" option.
8.
Select the required option from the display.
The default setting is -7.5 dB.
NOTE: This option is presented for both the T1 (RBS) and the PRI programming.
Calling number routing
Calls can be routed to extensions or groups based on Caller ID or ANI information received from the network.
If the number received matches an entry in the CID/ANI Table (200 entries) the call is routed to the programmed
extension or group. If the received number does not match an entry in the list, the call is presented to the group or
extension programmed for the T1 line, or the PRI interface, in the Incoming Ringing programming. The default
setting is that calls ring Group 1.
If a name is associated with the number in the CID/ANI Table the name is presented to the extension or
extensions programmed to ring.
1.
From the programming extension, press the PROGRAM key.
2.
Press the Scroll Down key (î) until "System Programming" is displayed.
3.
Select "System Programming".
4.
Enter the System Programming Password and select "Lines".
5.
Press the Scroll Down key (î) until "CID / ANI Table" is displayed.
6.
Select "CID / ANI Table".
7.
Select an Index Number (001 - 200).
8.
Enter the caller telephone number.
9.
Press "Confirm".
10. Enter the name to be associated with the number.
11. Press Confirm.
12. Select the option "Day Mode", "Night Mode" or "Day and Night Mode".
114
Hide quick links:
Advertisement
Table of Contents
