Dell KY0730481 Installation And Startup Manual page 8

1. Open the top of the smaller Dell box. This
contains the Monitor.
2. Carefully flip the box over with the flaps
out.
3. Pull the box up, leaving the contents on
the table.
4. Remove the packaging from the monitor
and cabling.
The contents of the monitor box should be as
displayed here.
The video cable (blue connectors) is already
connected to the back of the monitor.
Note: The digital cable (white connectors) is
not used with the Matchprint
Professional Server monitor.
Page 8 of 36
Matchprint Professional Server IIx for Xerox: Hardware Installation and Startup
2003 Kodak Polychrome Graphics. All rights reserved.