Table of Contents
Advertisement
3. Position the system as
shown in the following
photo.
The photo shows the
Matchprint Professional
Server installed on the
optional cart.
The monitor and server
should be located within
15 feet of the Xerox
copier/printer. The
server should be placed
in a location that
provides sufficient
airflow clearance. The
monitor should be
positioned on a solid
table or cart.
Page 14 of 36
Matchprint Professional Server IIx for Xerox: Hardware Installation and Startup
Important Note! Surge protection is strongly recommended for all
Matchprint Professional Server installations. The power source for the
Matchprint Professional Server must be continuous and not interrupted
by an on-site failure.
2003 Kodak Polychrome Graphics. All rights reserved.
Advertisement
Table of Contents
