Table of Contents
Advertisement
4.
Select a specific media, then enter how often the printer requires calibration for that particular
media. Repeat this process for each media.
The Last Calibration column displays the time elapsed since a particular media has been
calibrated. Uncalibrated medias display "n/a" in this column. If the time elapsed is longer than the
calibration interval, the "Calibrated?" column will say No.
Notes:
Selecting the Reset button, nullifies the most recent calibration and returns the selected
media to its default setting.
The "Calibrate this printer every ___ days" is specific to the printer only. The "Last
Calibration" number indicates when the printer was last calibrated with specified media.
For example, if the printer is set to be calibrated every 3 days, it may have been 6 days
since it was last calibrated with commercial paper and 2 days since it was last calibrated
with bond. However, regardless of the media type, the printer is set to be calibrated every
3 days.
5.
Click OK.
6.
From the Calibration menu, select Perform Printer Calibration. The following screen appears:
Note: All jobs in the queue are put on hold during calibration process except the jobs currently
printing.
Page 30 of 36
Matchprint Professional Server IIx for Xerox: Hardware Installation and Startup
2003 Kodak Polychrome Graphics. All rights reserved.
Advertisement
Table of Contents
