Dell KY0730481 Installation And Startup Manual page 27

Matchprint Professional Server IIx for Xerox: Hardware Installation and Startup
The contents of each tray can vary from site to site, however standard tray setup is as follows:
Tray 1: Media Type - Normal Bond, Media Size - Letter (8.5 x 11 inches)
Tray 2: Media Type - Normal Bond, Media Size - Letter SEF (11 x 8.5 inches)
Tray 3: Media Type - Normal Bond, Media Size - Legal (8.5 x 14 inches)
Tray 4: Media Type - Normal Bond, Media Size - Tabloid (11 x 17 inches)
Tray 6 (High Capacity Feeder) – Optional: Media Type - Normal Bond, Media Size - Letter (8.5
x 11 inches)
Notes:
•
Tray 5 is a manual feed tray located on the left side of the Xerox DocuColor 12. (Tray 5
is not configured here.)
•
Load Kodak Polychrome Graphics/Xerox Color Laser Proofing Paper so the watermark
wording is face down in the tray.
•
The DocuColor 12 can be set to disable automatic tray switching, however the
Matchprint Professional Server overrides this setting if the job's parameters are set to
Automatically Select the input tray. Go to the Setting Job Parameters, Printer tab in
the online help or the user guide.pdf for more information.
4. If calibration is required, go to Printer Calibration.
2003 Kodak Polychrome Graphics. All rights reserved.
Page 27 of 36