Ericsson-lg ldp-7016d; ldp-7024d digital telephone (46 pages)
Summary of Contents for LG-Ericsson LIP-8002/8002A
Page 1
IP Phone Installer Guide LIP-8002/8002A SIP (Session Initiation Protocol) iPECS Please read this manual carefully before installation. Retain it for future reference.
Copyright Laws. LG-Ericsson reserves the right to make changes in specifications at any time without notice. The information furnished by LG-Ericsson in this material is believed to be accurate and reliable, but is not warranted to be true in all cases.
Page 3
Do not use during lightning storms. Lightning presents a potentially lethal shock hazard. Clean the LIP-8002/8002A with a soft dry cloth; do not use liquid cleaners. Always use caution when connecting to AC power. Use only with a properly grounded standard AC power outlet.
LIP-8002/8002A iPECS Installer Guide Table of Contents Introducing the LIP-8002/8002A ................1 1.1 The IP Phone LIP-8002/8002A Overview .................1 Installing the LIP-8002/8002A ................4 2.1 Connecting the IP Phone ....................4 2.2 Wall Mounting ........................5 2.3 Provisioning the LIP-8002/8002A ..................6 Using the LCD Configuration Menu ..............8 3.1 Navigating the LCD Configuration Menu ................10...
Page 5
LIP-8002/8002A iPECS Installer Guide 3.6.2.2 Trunk Ring Type......................28 3.6.3 Ringer Off ........................29 3.6.4 Flexible Button Setting.....................29 3.6.5 Time Configuration ....................30 3.6.5.1 SNTP Server Address..................... 30 3.6.5.2 Time Zone........................31 3.6.5.3 DST Auto Adjustment...................... 31 3.6.5.4 Time Format........................32 3.6.5.5 Date Format ........................
Page 6
TroubleShooting ....................73 5.1 Information ........................73 5.2 Troubleshooting Guide....................74 Appendix A. Factory Default Configuration ..............75 Appendix B. LIP-8002/8002A Specification ...............79 Appendix C. Download LCD Messages ..............80 Appendix D. Using the Configuration File..............81 Appendix E. Dial Pad Mode ..................98 Appendix F. Auto Provisioning Routine..............99...
1. Introducing the LIP-8002/8002A 1.1 The IP Phone LIP-8002/8002A Overview The LG-Ericsson IP phone (LIP-8002/8002A) is Internet Protocol (IP) phones designed to support hosted telephony services over a managed IP network. Based on the open standard Session Initiation Protocol (SIP), LIP-8002/8002A interoperates and exchanges signaling messages with SIP call servers, proxies and gateways to establish, maintain and terminate calls.
Page 8
Station-to-Station dialing Volume control (handset, speakerphone, and ring) 3-Way conference For ease of use, the LIP-8002/8002A is equipped with fixed buttons, flexible (programmable) buttons, an LCD display, menu navigation buttons, and a dial pad. Figure 1.1-1illustrates these elements of the LIP-8002/8002A.
Page 9
LIP-8002/8002A iPECS Installer Guide Number Function Left button - Move to the previous menu in the settings menu. Right button Up button - When the phone is in the idle state, accesses the call log. Down button - When the phone is in the idle state, accesses the phonebook.
LIP-8002/8002A iPECS Installer Guide 2. Installing the LIP-8002/8002A 2.1 Connecting the IP Phone The figure below shows the cable connections for your IP Phone. The LAN and desktop PC connections employ standard Category 5 cables terminated with RJ-45 connectors. The LIP- 8002 supports PoE (Power over Ethernet) in accordance with the IEEE-802.1af standard.
Figure 2.1-2 RJ-45 Terminations 2.2 Wall Mounting The LIP-8002/8002A incorporates wall mounting in the base of the phone housing. Using the instructions below and Figure 2.2-1, wall mount the LIP-8002/8002A phone. Mark and drill two 7 mm holes for plastic wall anchors with a vertical separation of 10 cm.
LIP-8002/8002A incorporates means for manual configuration when the automated process is not fully available. As a minimum, the LIP-8002/8002A requires the information below for proper operation. When not assigned through the automated provisioning process, manual entry of the below parameters is required for proper operation.
Page 13
LIP-8002/8002A iPECS Installer Guide o Default gateway address o Subnet mask Two methods are available for manual configuration. The LCD Configuration Menu permits local configuration using the dial pad, see section 3 The second method employs the LIP- 8002/8002A Web Manager, which allows access to the IP phone configuration using a Web...
Installer Guide 3. Using the LCD Configuration Menu This chapter provides detailed information to configure the LIP-8002/8002A using the LCD Configuration Menu. The LCD displays the configuration menu. The dial pad select menu items and input values. A configuration session begins by pressing the Settings (...
Page 15
LIP-8002/8002A iPECS Installer Guide 1. Network Configuration 1. Network Mode 2. IP Address 3. Subnet Mask 4. Default Gateway 5. Primary DNS Address 1. VLAN Priority (LAN) 6. Secondary DNS Address 2. VLAN ID (LAN) 7. MAC Address 3. VLAN Priority (PC) 8.
LIP-8002/8002A iPECS Installer Guide 3.1 Navigating the LCD Configuration Menu The IP phone must be idle to access the configuration menu and may be password protected (Locked). If locked, advanced configuration parameters can be viewed, however, data entry is not possible. Refer to section 3.3.
Page 17
LIP-8002/8002A iPECS Installer Guide data displays while the menu is locked however, the menu must be unlocked using the password in order to change advanced parameters. Parameters under the ‘Phone Settings’ item listed below are not subject to the lock feature, allowing the user access without the need to enter a password.
LIP-8002/8002A iPECS Installer Guide 3.4 Network Configuration Under Network Configuration are the Network mode (DHCP or static), various IP addresses, DNS (Domain Name Service), and other LAN parameters. In addition, the IP phone MAC (Media Access Control) address can be viewed. When using the WiFi Module refer to section 5 for the Network Configuration sub-menus.
LIP-8002/8002A iPECS Installer Guide Press the digit, or move the cursor to 1.Network Configuration using the navigation buttons and press the OK button. Press the digit, or move the cursor to 2.IP Address using the navigation buttons and press the OK button.
LIP-8002/8002A iPECS Installer Guide Press the Settings ( ) button. If the LCD Menu is locked, use the unlock procedure. Refer section 3.3. Press the digit, or move the cursor to 1.Network Configuration using the navigation buttons and press the OK button.
LIP-8002/8002A iPECS Installer Guide 3.4.6 Secondary DNS Address With an FQDN assigned as any of the servers in the IP phone configuration, the IP phone contacts the primary DNS server to resolve the FQDN to an IP address. Should the primary not respond, the IP phone contacts a secondary DNS for FQDN resolution.
IEEE 802.1p/Q standards. Separate VLAN tags are assigned for the IP Phone PC port and the LAN (voice) port. With a VLAN Id assigned, only frames with the assigned Id are accepted, and all SIP and voice frames sent by the LIP-8002/8002A include the VLAN Id assigned to the LAN port.
LIP-8002/8002A iPECS Installer Guide To assign the VLAN ID for the LAN (voice) port: Press the Settings ( ) button. If the LCD Menu is locked, use the unlock procedure. Refer section 3.3. Press the digit, or move the cursor to 1.Network Configuration using the navigation buttons and press the OK button.
LIP-8002/8002A iPECS Installer Guide 3.4.8.4 VLAN ID (PC) The VLAN ID (PC) assigns the identification for Ethernet frames for the IP Phone PC port. Setting the VLAN ID to zero (0) disables VLAN framing and the IP Phone uses only standard Ethernet frames.
LIP-8002/8002A iPECS Installer Guide Press the digit, or move the cursor to 1.Call Server Address using the navigation buttons and press the OK button. Input the Call Server Address or FQDN using the dial pad and press the OK button to save your entry.
LIP-8002/8002A iPECS Installer Guide Press the digit, or move the cursor to 1.Line Configuration using the navigation buttons and press the OK button. Press the digit, or move the cursor to 3.Display Name using the navigation buttons and press the OK button.
LIP-8002/8002A iPECS Installer Guide Press the digit, or move the cursor to 1.Line Configuration using the navigation buttons and press the OK button. Press the digit, or move the cursor to 5.Auth. Username using the navigation buttons and press the OK button.
LIP-8002/8002A iPECS Installer Guide 3.5.1.7 Registration Status The status of the line registration with the SIP call server can be viewed. The status is displayed as OK, NOK (Not OK) or undefined. The latter displays when no call server address is assigned.
LIP-8002/8002A iPECS Installer Guide 3.5.2.2 Outbound Proxy Port With the Outbound Proxy Server defined, the associated port must be defined as the Outbound Proxy Port. All SIP requests are sent to the assigned port instead of the proxy port configured section 3.5.1.2.
LIP-8002/8002A iPECS Installer Guide 3.5.2.4 Backup Proxy Port The Backup Proxy Port defines the port used when sending SIP messages to the backup proxy defined under section 3.5.2.3. To assign the Backup Proxy Port: Press the Settings ( ) button. If the LCD Menu is locked, use the unlock procedure. Refer section 3.3.
LIP-8002/8002A iPECS Installer Guide To assign an RTP Start Port: Press the Settings ( ) button. If the LCD Menu is locked, use the unlock procedure. Refer section 3.3. Press the digit, or move the cursor to 2.SIP Configuration using the navigation buttons and press the OK button.
LIP-8002/8002A iPECS Installer Guide Press the digit, or move the cursor to 2.SIP Configuration using the navigation buttons and press the OK button. Press the digit, or move the cursor to 9.Register Expires using the navigation buttons and press the OK button.
LIP-8002/8002A iPECS Installer Guide Move to another parameter with the navigation buttons and continue the session or press the Settings ( ) button to exit the configuration session. Changing the Domain requires a reboot of the IP Phone; when you leave the menu, you will receive a reboot notice.
Move to another parameter with the navigation buttons and continue the session or press the Settings ( ) button to exit the configuration session. The LIP-8002/8002A uses one of 4 ring types. The Phone Book entry may use a different type. 3.6.2.2 Trunk Ring Type To select the Trunk ring type for the IP Phone: ...
LIP-8002/8002A iPECS Installer Guide 3.6.3 Ringer Off The IP Phones can be programmed not to ring when an incoming call is received. To set the Ringer Off parameter: Press the Settings ( ) button. Press the digit, or move the cursor to 3.Phone Settings using the navigation buttons and press the OK button.
LIP-8002/8002A iPECS Installer Guide Press the digit, or move the cursor to 3.Phone Settings using the navigation buttons and press the OK button. Press the digit, or move the cursor to 4.Flexible Button using the navigation buttons and press the OK button.
LIP-8002/8002A iPECS Installer Guide Move to another parameter with the navigation buttons and continue the session or press the Settings ( ) button to exit the configuration session. To enter alphanumeric characters select the Mode button. Refer to Appendix E for the character mapping of dial pad digits.
LIP-8002/8002A iPECS Installer Guide 3.6.5.4 Time Format The format of the LCD time display can be set to display time in the 12-hour format or 24-hour format. In addition, the LCD time display can be disabled. To set the display format for time: ...
HTTPS Verification settings and DHCP Options can be viewed and changed. 3.6.6.1 Provisioning Type The LIP-8002/8002A supports two provisioning protocols: Trivial File Transfer Protocol (TFTP) – a simple transfer mechanism using UDP but lacks security and TFTP ports are often blocked at firewalls.
LIP-8002/8002A iPECS Installer Guide Press the digit, or move the cursor to 2.TFTP Server Address using the navigation buttons and press the OK button. Input the TFTP Server Address using the dial pad, and press the OK button to save your entry.
LIP-8002/8002A iPECS Installer Guide 3.6.6.3.2 Username In some cases, the HTTP/HTTPS server requires a Username (Id) and Password for authentication prior to allowing file access. To set the Username: Press the Settings ( ) button. If the LCD Menu is locked, use the unlock procedure. Refer section 3.3.
LIP-8002/8002A iPECS Installer Guide Changing the Password requires a reboot of the IP Phone; when you leave the menu, you will receive a reboot notice. The IP Phone must reboot to utilize the new values entered. To enter alphanumeric characters select the Mode button. Refer to...
LIP-8002/8002A iPECS Installer Guide Press the digit, or move the cursor to 6.S/W Update using the navigation buttons and press the OK button. Press button, or move cursor to 4.S/W Download Flag using the navigation buttons and press the OK button.
LIP-8002/8002A iPECS Installer Guide To set the DHCP Options flag: Press the Settings ( ) button. If the LCD Menu is locked, use the unlock procedure. Refer section 3.3. Press the digit, or move the cursor to 3.Phone Settings using the navigation buttons and press the OK button.
Installer Guide 3.6.8 Speed Number LIP-8002/8002A includes a Phone Book that supports up to 100 entries. Each Phone Book record includes a two (2) digit Speed number, see section 3.8. When enabled, dialing the Speed Number (00~99) sends the contact information from the associated Phone Book record.
LIP-8002/8002A iPECS Installer Guide Press the digit, or move cursor to 3.Phone Settings using the navigation buttons, and press the OK button. Press the digits, or move cursor to 10.Language using the navigation buttons, and press the OK button.
LIP-8002/8002A iPECS Installer Guide If Call Waiting is disabled, the IP Phone will reject the new call. The call server configuration determines routing of the incoming call. To enable/disable Call Waiting: Press the Settings ( ) button. If the LCD Menu is locked, use the unlock procedure. Refer section 3.3.
LIP-8002/8002A iPECS Installer Guide Press the digit, or move the cursor to 4.Call Hold Ringback using the navigation buttons and press the OK button. Select On to enable the Hold Ringback, or select Off to disable the Hold Ringback using the Up/Down navigation buttons and press the OK button.
Settings ( 3.7.8 Anonymous Call Block The LIP-8002/8002A can block incoming calls with an anonymous caller id. To enable/disable Anonymous Call Blocking: Press the Settings ( ) button. If the LCD Menu is locked, use the unlock procedure. Refer section 3.3.
LIP-8002/8002A iPECS Installer Guide 3.8.1 Dialing from the Phone Book To dial a number from the Phone Book: Press the Settings ( ) button. Press the digit, or move the cursor to 5.Directory using the navigation buttons and press the OK button.
Page 51
LIP-8002/8002A iPECS Installer Guide Press the digit, or move the cursor to 9.Reboot using the navigation buttons, and press the OK button. Press the OK button to reboot. If you press Left navigation button in the above step, move to another parameter with the...
Web page in the order shown in the page link area of the site map. 4.1 Login & Site Map Point your browser at the LIP-8002/8002A IP address and port 8000, <http://150.150.255.251:8000>, which returns the IP Phone Login page as below.
Page 53
LIP-8002/8002A iPECS Installer Guide Click LOGIN; the password page displays as below. Enter a valid User name and Password to display the Web Manager Site map shown in Figure 4-1. The default User name is private and the Password is lip.
LIP-8002/8002A iPECS Installer Guide VoIP Configuration Figure 4.2-1 VoIP Configuration...
Page 55
LIP-8002/8002A iPECS Installer Guide Within the VoIP screen, adjustable parameters are: Line based parameters o Proxy Server Address is the IP address or FQDN of the SIP call server or SIP proxy. o Proxy Port is the server port for incoming requests and outgoing responses o Display Name is the name used as part of the IP Phone caller ID.
Page 56
LIP-8002/8002A iPECS Installer Guide o Start RTP Port is the port for Real-time Transport Protocol (voice) packets. o SRTP can use the Secure RTP by using the SRTP crypto suite. o Codec priority selects the priority for audio codecs. To modify a parameter: ...
LIP-8002/8002A iPECS Installer Guide 4.3 LAN Configuration Figure 4.3-1 LAN Configuration When the WiFi Module is installed, refer to section 5 for LAN Configuration. When the WiFi module is not installed, in the LAN screen the adjustable parameters are: LAN Configuration o Network Selection is the IP address mode for the IP Phone.
Page 58
LIP-8002/8002A iPECS Installer Guide To modify any of the addressing information Select the appropriate box and enter the new value. Changes can only be made if static network mode is selected. When complete, select the button to load new values to the IP Phone memory.
LIP-8002/8002A iPECS Installer Guide Call Preferences Figure 4.4-1 Call Preferences The IP Phone supports various user preferences as listed below. Call Preferences o Caller ID Blocking enables and disables blocking the outgoing caller id. When enabled, the IP Phone sends the anonymous id.
Page 60
LIP-8002/8002A iPECS Installer Guide o Call Waiting Function, when enabled, visually notifies the user of an incoming call while in a conversation. If disable, when in a conversation, a new call is refused and the call server routes the call.
LIP-8002/8002A iPECS Installer Guide Dial Plan The IP Phone incorporates a Dial Plan, which monitors the user-dialed digits for patterns matching the dial plan number. If a match occurs, the phone modifies the digits and processes the call using instructions in the dial plan.
Page 62
LIP-8002/8002A iPECS Installer Guide Pre defines digits to insert in the front of the truncated number. Post defines the digits to insert at the end of the truncated number. The following are examples of Dial Plans using the digit map tables.
Installer Guide Phone Information Figure 4.6-1 Phone Information The Phone Information screen displays the version information of the LIP-8002/8002A and the phone name. In addition, it is possible to change the Web Manager password through this screen. To change the phone name: ...
LIP-8002/8002A iPECS Installer Guide Phone Settings Figure 4.7-1 Phone Settings In the Phone Settings screen, the following parameters may be modified. Phone Settings o Frame Duration sets the interval to send/receive RTP packets in milli-seconds. o DTMF Relay selects the method for DTMF signaling (in-band, out-of-band or...
Page 65
LIP-8002/8002A iPECS Installer Guide o DTMF Payload sets the RFC 2833 payload type for DTMF signals. o DTMF Duration sets the duration of DTMF signals sent from the phone in milli- seconds. o Lock Outgoing Call locks the IP Phone, requiring password entry to place a call.
LIP-8002/8002A iPECS Installer Guide Phone Book Figure 4.8-1 Phone Book The IP Phone includes a Phone Book with 100 contact records. Calls to a contact are made using the Speed number (00-99). The contact number or SIP user id is maintained in the Phone Book.
Page 67
LIP-8002/8002A iPECS Installer Guide Figure 4.8-2 Add a Phone Book Entry When complete, select the button to store the record. To modify an entry: Select Modify for the desired record and enter the new values in the Phone Book Entry screen.
Page 68
LIP-8002/8002A iPECS Installer Guide An example Phone Book and resulting file are shown below. Phone Book Speed Number Name Phone Number Information Lee Myunghee 1000 lmh@abc.com baragirl 2000 3000 korea sample *.csv file SpeedNumber,Name,PhoneNumber,Information 1,Lee Myunghee,1000,lmh@abc.com 2,baragirl,2000, 3,lmh,3000,korea...
LIP-8002/8002A iPECS Installer Guide Flexible Button Figure 4.9-1 Flexible Button The LIP-8002/8002A has 4 flexible buttons. The buttons can be assigned to various functions. Refer to Table 3.6.5-1 for available functions. To change button functions: Select the function from the drop-down menu next to button.
LIP-8002/8002A iPECS Installer Guide 4.10 Call Log Figure 4.10-1 Call Log The Call Log is a list of all calls (incoming, outgoing or missed) at the extension. The log indicates the type of call (I/C, O/G and MIS), the contacts name and contact information, time and duration of the call, and state of the call.
LIP-8002/8002A iPECS Installer Guide 4.11 Network Time Configuration Figure 4.11-1 Network Time Configuration...
Page 72
LIP-8002/8002A iPECS Installer Guide The Network Time screen allows you to set up the configuration for time and daylight savings time. Within Network Time Configuration, the following parameters can be set. Network Time Configuration o SNTP Server Address is the IP address or FQDN of the SNTP (Simple Network Time Protocol) server.
LIP-8002/8002A iPECS Installer Guide 4.12 Upgrade Configuration Figure 4.12-1 Upgrade Configuration In the Upgrade screen, the results of the most recent download attempt are displayed at the top of the screen. Upgrade result messages are defined in Appendix C. A log displays any error conditions for the configuration file download.
Page 74
LIP-8002/8002A iPECS Installer Guide o TFTP Server Address assigns the IP address or FQDN of the TFTP server where configuration and software files are located. With the “Received by DHCP on boot” box checked, the IP Phone only uses the TFTP server retrieved with DHCP option 66 or 150.
LIP-8002/8002A iPECS Installer Guide 4.13 QoS Configuration Figure 4.13-1 QoS Configuration Diffserv Configuration On the QoS screen, the DiffServ Code Point (DSCP) and VLAN parameters are defined. DSCP or ToS establishes the priority of voice packets. Compatible routers apply the DSCP for packet...
Page 76
LIP-8002/8002A iPECS Installer Guide priority, handling higher priority packets first. However, at congested routers, higher priority packets are discarded first. Thus, a median value for DSCP is recommended. IEEE 802.1Q The VLAN tag defines the priority for Ethernet frames and the VLAN ID based on IEEE 802.1p/Q.
LIP-8002/8002A iPECS Installer Guide 4.14 Load Default Figure 4.14-1 Load Default The Load Default page permits the IP Phone configuration to be returned to factory default values. Refer to Appendix A for details. To set the IP Phone memory to the default configuration: ...
LIP-8002/8002A iPECS Installer Guide 4.15 Reboot Figure 4.15-1 Reboot The Reboot screen is used to reboot the IP Phone manually. To reboot the IP Phone: Select the button. The IP Phone saves and loads any changes in the configuration to active memory and...
5. TroubleShooting 5.1 Information The LIP-8002/8002A provides the means to quickly view the Network parameters (IP address, default gateway address, and subnet-mask), server IP addresses (call server, TFTP server, and SNTP server), and results of the last file download attempt.
LIP-8002/8002A iPECS Installer Guide 5.2 Troubleshooting Guide Table 5.2-1 Troubleshooting Symptom Corrective Action 1. Switch power source ON LCD Off 2. Check/replace AC/DC adapter 3. Check/correct input power from the LAN Handset off-hook, 1. Assure the RJ-45 LAN cable is connected correctly.
LIP-8002/8002A iPECS Installer Guide Appendix A. Factory Default Configuration Factory default configurations are settings for the configuration, which are set at the factory. Table A-1 below gives the default values for configurable parameters. Table A-1 Default Configuration Config File Parameter/Field...
Page 83
LIP-8002/8002A iPECS Installer Guide Config File Parameter/Field Default Value Section Name telnet_server** enabled Phone password Not assigned Function download_flag* enabled Function onetouch_pickup* enabled Function dnd* enabled Web Manger login name* private Web Manager login password* Line Lock Out enabled Line Lock Out Time...
Page 84
LIP-8002/8002A iPECS Installer Guide NOTE: Parameters marked with an asterisk, , cannot be modified via the LCD Configuration Menu. Parameters mark with double asterisk, , can only be modified using the configuration file download.
LIP-8002/8002A iPECS Installer Guide Appendix B. LIP-8002/8002A Specification Table B-1 provides the basic specifications of the IP Phone. Table B-1 LIP-8002/8002A Specifications Item LIP-8002/8002A Network Interface RJ-45 IEEE 802.3 Ethernet/Fast Ethernet switch port PC/Workstation Interface RJ-45 IEEE 802.3 Ethernet/Fast Ethernet switch port Power 802.3af or AC/DC Power Adapter...
LIP-8002/8002A iPECS Installer Guide Appendix C. Download LCD Messages Table C-1 provides the messages displayed for the most recent software download attempt. Table C-1 Software Download Message Message Description LOAD FLAG OFF S/W load is disabled NULL SERVER ADDR TFTP/WEB server address is 0.0.0.0...
LIP-8002/8002A iPECS Installer Guide Appendix D. Using the Configuration File During automated provisioning with the Config. Download flag, section 4.12 enabled, IP Phones attempt to download a global and a phone specific configuration file from a TFTP or Web server supporting HTTP/HTTPS.
Page 88
LIP-8002/8002A iPECS Installer Guide Table D-1 Configuration Parameters Field Name Section Description Sets use of DHCP or static addressing. In static mode, IP network_mode parameters are set manually. In DHCP, the IP Phone requests addresses from the local DHCP server including...
Page 89
LIP-8002/8002A iPECS Installer Guide Field Name Section Description pc_vlan_id Assigns unique identifier of the VLAN for the PC port. A ‘0’ disables VLANS. Valid values are 0 to 4094 Default is 0, disable. phone_vlan_id Assigns unique identifier of the VLAN for the LAN (voice) port.
Page 90
LIP-8002/8002A iPECS Installer Guide Field Name Section Description dst_stop_week_of_month Sets week of month DST ends. Valid values are 1 to 6 and 7, with 1 being the first week, each number thereafter being subsequent weeks. Seven (7) represents the last week in the month The default is 1 for the United States.
Page 91
LIP-8002/8002A iPECS Installer Guide Field Name Section Description Defines local TCP port used for SIP messages. local_tcp_port Valid values are from 1024 to 32000. Default is 5060. Defines TLS port used for SIP messages.. local_tls_port Valid values are from 1024 to 32000.
Page 92
LIP-8002/8002A iPECS Installer Guide Field Name Section Description Enables de-registration of each line during a reboot prior to de_register re-registering. Valid values are enable or disable Default is enable line1_proxy_address Assgin the proxy address for the SIP proxy server. Valid value is an IP address or FQDN.
Page 93
LIP-8002/8002A iPECS Installer Guide Field Name Section Description ring_type Specifies the default ring type for the IP Phone. Ring type can be a value from 1 to 4. The default is 1. alert_ring_type external Specifies the external ring type for the IP Phone. Ring type can be a value from -1 to 4: •...
Page 94
LIP-8002/8002A iPECS Installer Guide Field Name Section Description Sets the ring cadence for calls with community-1 call in Alert cadence7 Info header. The valid value is an eight value time array (on off on off on off on off). The valid range is 0 to 30000 milliseconds total time.
Page 95
LIP-8002/8002A iPECS Installer Guide Field Name Section Description Sets the method to determine RFC 2833 payload type. dtmf Valid values are: • inband — Always generate in-band DTMF. • nego — Negotiate RFC2833 with remote side. • rfc2833 — Always generate DTMF digits out-of-band RFC2833.
Page 96
LIP-8002/8002A iPECS Installer Guide Field Name Section Description Defines the digit map process for a dial plan. digitmap_process Valid values are: • num: the digitmap string, maximum 512-characters. • trunc: number of digits to strip, 0 to 30. • prefix: digits to insert in front of the number, maximum 32 digits.
Page 97
LIP-8002/8002A iPECS Installer Guide Field Name Section Description Controls audible notification when Call Waiting is enabled call_waiting_tone Valid values are enable or disable. Default is enable. Sets Held call ringback. If a user returns to idle with a call on call_hold_ringback hold, the held line will ring.
Page 98
LIP-8002/8002A iPECS Installer Guide Field Name Section Description Enables call answer or resume from hold by pressing line function onetouch_pickup button. With the parameter disabled, pressing the line button displays the line status. Valid values are enable or disable. The default is enable.
Page 99
LIP-8002/8002A iPECS Installer Guide Field Name Section Description Specifies the filename of phone specific configuration file. https_macform The name or path must include “$MAC”, which is replaced by the MAC address during provisioning. The valid value is a maximum of 50 characters and includes “$MAC”.
Page 100
LIP-8002/8002A iPECS Installer Guide ;========================================================================= ;LIP-8002 configuration information(v1.0) ;copyright LG-Ericsson since 2010 ;========================================================================= ;Description for configuration file ;configuration file has following format ; SECTION-NAME is placed in brackets as shown below and includes LAN, VOIP, DSP, etc... ;name is the parameter or field name as shown below ;value is the value assigned for the parameter.
LIP-8002/8002A iPECS Installer Guide Appendix E. Dial Pad Mode The LIP-8002/8002A dial pad inputs digits or alphanumeric characters for specified entries such as hostname. Table E-1 provides the input information for dial pad mode. Table E-1 Alphanumeric Character Set Digit...
Appendix F. Auto Provisioning Routine General The LIP-8002/8002A incorporates software routines to automatically provision the configuration and software of the phone. To initialize LAN settings, DHCP to gather basic network and provisioning server information, downloads configuration and software files from the provisioning server, and registers and subscribes with the SIP call server using the configuration data.
Page 106
These files along with the version file are available from LG- Ericsson. If desired, comments may be added to the version file using “#” as the leading character of the comment line.
Page 107
These files along with the version file are available from LG-Ericsson. If desired, comments may be added to the version file using “#” as the leading character of the comment line.