Call Preferences; Do Not Disturb; Call Waiting - LG-Ericsson LIP-8002/8002A Installer's Manual

iPECS
 Press the
digit, or move cursor to 3.Phone Settings using the navigation buttons, and
press the OK button.
 Press the
press the OK button.
 Select a Language from the list using the Up/Down navigation buttons, and press the OK
button.
 Move to another parameter with the navigation buttons and continue the session or press the
Settings ( ) button to exit the configuration session.
An asterisk, , displays in front of the current language selection.

3.7 Call Preferences

Call Preferences define various call handling features of the IP Phones.
3.7.1

Do Not Disturb

When the DND (Do Not Disturb) feature is active, the IP Phone does not notify the user of an
incoming call. The IP Phone does not ring and the associated line LED does not flash. This
allows you to work without interruption from an incoming call. The call server configuration
determines routing of the incoming call while your phone is in DND. To activate DND, DND
must be enabled.
To enable the DND operation:
 Press the Settings (
to section 3.3.
 Press the
digit, or move the cursor to 4.Call Preferences using the navigation buttons
and press the OK button.
 Press the
digit, or move the cursor to 1.Do Not Disturb using the navigation buttons and
press the OK button.
 Select On to enable DND, or select Off to disable DND using the Up/Down navigation
buttons and press the OK button.
 Move to another parameter with the navigation buttons and continue the session or press the
Settings ( ) button to exit the configuration session.
3.7.2

Call Waiting

With Call Waiting configured, while on a call the IP Phone alerts the user of an incoming call.
The line button flashes to indicate the new call, and an optional beep tone is delivered over the
existing conversation, see
during the ring signal so you know who is calling before you interrupt the current call.
digits, or move cursor to 10.Language using the navigation buttons, and
) button. If the LCD Menu is locked, use the unlock procedure. Refer
section 3.7.3. In addition, the LCD displays the incoming caller id
40
LIP-8002/8002A
Installer Guide