LG-Ericsson LIP-8002/8002A Installer's Manual page 91

iPECS
Field Name
Section
local_tcp_port
local_tls_port
tcp_port
tls_port
transport_mode
tls_crypto
srtp_crypto
srtp_use
timer_register_expires
timer_session
timer_t1
timer_t2
Defines local TCP port used for SIP messages.
Valid values are from 1024 to 32000.
Default is 5060.
Defines TLS port used for SIP messages..
Valid values are from 1024 to 32000.
Default is 5061.
Defines TCP port used for SIP messages.
Valid values are from 1024 to 32000.
Default is 5060.
Defines TLS port used for SIP messages.
Valid values are from 1024 to 32000.
Default is 5061.
Defines the transport mode.
Valid values are UDP, TCP and TLS.
Default is UDP.
Defines the order of tls cyprto suite.
Valid values are
AES_CM_128_HMAC_SHA1_32,
AES_F8_128_HMAC_SHA1_80,
ARIA_CM_128_HMAC_SHA1_80.
Default order is
ARIA_CM_128_HMAC_SHA1_80.
Defines the order of srtp crypto suite.
Valid values are
AES_CM_128_HMAC_SHA1_32,
AES_F8_128_HMAC_SHA1_80,
ARIA_CM_128_HMAC_SHA1_80,
ARIA_CM_192_HMAC_SHA1_80.
Default order is
ARIA_CM_128_HMAC_SHA1_80,
ARIA_CM_192_HMAC_SHA1_80.
Enables use of the SRTP.
Valid values are disable and enable.
Default is disable.
Defines time, in seconds, that a registration expires and re-
registration is required. The Expire header in the registration
message includes this value. A value of '0' is a de-
registration.
Valid values are 0 to 6400.
Default is 3600.
Specifies the SIP session timer, in seconds.
Valid values are 0 to 640.
Default is 0.
Sets the lowest value, in milliseconds, for the retransmission
of SIP messages.
Valid values are 100 to 640.
Default is 250.
Sets the highest value, in milliseconds, for the retransmission
of SIP messages.
Valid values are 641 to 6400.
Default is 2000.
85
LIP-8002/8002A
Installer Guide
Description
AES_CM_128_HMAC_SHA1_80,
AES_CM_128_HMAC_SHA1_80,
AES_CM_128_HMAC_SHA1_80,
AES_CM_128_HMAC_SHA1_80,