Outbound Proxy Port; Backup Proxy Address - LG-Ericsson LIP-8002/8002A Installer's Manual

iPECS

3.5.2.2 Outbound Proxy Port

With the Outbound Proxy Server defined, the associated port must be defined as the Outbound
Proxy Port. All SIP requests are sent to the assigned port instead of the proxy port configured
in section 3.5.1.2.
To assign the Outbound Proxy Port:
 Press the Settings (
to section 3.3.
 Press the
digit, or move the cursor to 2.SIP Configuration using the navigation buttons
and press the OK button.
 Press the
digit, or move the cursor to 3.Outbound Proxy Port using the navigation
buttons and press the OK button.
 Input the Outbound Proxy Port using the dial pad and press the OK button to save your entry.
 Move to another parameter with the navigation buttons and continue the session or press the
Settings ( ) button to exit the configuration session.
Changing the Outbound Proxy Port requires a reboot of the IP Phone; when you leave
the menu, you will receive a reboot notice. The IP Phone must reboot to utilize the new
values entered.

3.5.2.3 Backup Proxy Address

When employing an outbound proxy, a backup proxy can be defined for use should the primary
proxy fail to respond. The Backup Proxy Address is an IP address or a FQDN.
To assign a Backup Proxy Address:
 Press the Settings (
to section 3.3.
 Press the
digit, or move the cursor to 2.SIP Configuration using the navigation buttons
and press the OK button.
 Press the
digit, or move the cursor to 4.Backup Proxy Address using the navigation
buttons and press the OK button.
 Input the Backup Proxy Address using the dial pad and press the OK button to save your
entry.
 Move to another parameter with the navigation buttons and continue the session or press the
Settings ( ) button to exit the configuration session.
Changing the Backup Proxy Address requires a reboot of the IP Phone; when you leave
the menu, you will receive a reboot notice. The IP Phone must reboot to utilize the new
values entered.
To enter alphanumeric characters select the Mode button. Refer to
character mapping of dial pad digits.
) button. If the LCD Menu is locked, use the unlock procedure. Refer
) button. If the LCD Menu is locked, use the unlock procedure. Refer
23
LIP-8002/8002A
Installer Guide
Appendix E for the