Vlan Settings; Vlan Priority (Lan); Vlan Id (Lan) - LG-Ericsson LIP-8002/8002A Installer's Manual

iPECS
3.4.8

VLAN Settings

VLAN settings define the Ethernet frame priority and VLAN identification in accordance with
IEEE 802.1p/Q standards. Separate VLAN tags are assigned for the IP Phone PC port and the
LAN (voice) port. With a VLAN Id assigned, only frames with the assigned Id are accepted, and
all SIP and voice frames sent by the LIP-8002/8002A include the VLAN Id assigned to the LAN
port.
For proper operation, other network elements (LAN switches and default gateway) must
support and be configured with proper VLAN parameters.
Changing the VLAN parameters requires a reboot of the IP phone; when you leave the
menu, you will receive a reboot notice. The IP phone must reboot to utilize the new
values entered.

3.4.8.1 VLAN Priority (LAN)

The VLAN Priority (LAN) establishes the priority for Ethernet frames from the LIP-8002/8002A
voice port including signaling and voice packets. Setting the VLAN ID to zero (0) disables VLAN
framing and the IP Phone uses only standard Ethernet frames.
To assign VLAN Priority for the LAN (voice) port:
 Press the Settings (
to section 3.3.
 Press the
digit, or move the cursor to 1.Network Configuration using the navigation
buttons and press the OK button.
 Press the
digit, or move the cursor to 8.VLAN Settings using the navigation buttons and
press the OK button.
 Press the
digit, or move the cursor to 1.VLAN Priority (LAN) using the navigation
buttons and press the OK button.
 Input the VLAN Priority for the LAN port using the dial pad and press the OK button to save
your entry.
 Move to another parameter with the navigation buttons and continue the session or press the
Settings ( ) button to exit the configuration session.
Changing the VLAN Priority requires a reboot of the IP Phone; when you leave the
menu, you will receive a reboot notice. The IP Phone must reboot to utilize the new
values entered.
The recommended value for VLAN Priority (LAN) port is 5.
To disable VLANs, assign the VLAN ID as zero (0).

3.4.8.2 VLAN ID (LAN)

The VLAN ID (LAN) assigns the identification for Ethernet frames for the IP Phone voice port
including signaling and voice payloads. Setting the VLAN ID to zero (0) disables the VLAN
framing and the IP Phone uses only standard Ethernet frames.
) button. If the LCD Menu is locked, use the unlock procedure. Refer
16
LIP-8002/8002A
Installer Guide