Network Configuration; Network Mode; Ip Address - LG-Ericsson LIP-8002/8002A Installer's Manual

iPECS

3.4 Network Configuration

Under Network Configuration are the Network mode (DHCP or static), various IP addresses,
DNS (Domain Name Service), and other LAN parameters. In addition, the IP phone MAC
(Media Access Control) address can be viewed. When using the WiFi Module refer to
for the Network Configuration sub-menus.
Changing network parameters requires a reboot of the IP phone; when you exit the LCD
Configuration Menu, you will receive a reboot notice. The IP phone must reboot to
utilize the new values entered.
3.4.1

Network Mode

The IP phone is capable of obtaining all of its IP configuration data from a DHCP server. When
a DHCP server is not available, static addressing is used for the Network Mode. Selecting static
addressing requires manual entry of other IP network parameters including:
- IP address of the phone
Default gateway IP address
-
Subnet mask
-
DNS address
-
To set the Network Mode:
 Press the Settings (
to section 3.3.
 Press the
digit, or move the cursor to 1.Network Configuration using the navigation
buttons and press the OK button.
 Press the
digit, or move the cursor to 1.Network Mode using the navigation buttons and
press the OK button.
 Select the Network Mode using the Up/Down navigation buttons and press the OK button to
save your selection.
 Move to another parameter with the navigation buttons and continue the session or press the
Settings ( ) button to exit the configuration session.
An asterisk, , is displayed in front of the current selection.
Changing the Network Mode requires a reboot of the IP phone; when you exit the LCD
Configuration Menu, you will receive a reboot notice. The IP phone must reboot to
utilize the new values entered.
3.4.2

IP Address

Selecting static addressing for the Network mode requires manual entry of an IP address for the
IP phone. The IP phone requires a valid available IP address for proper operation.
To set the IP Address:
 Press the Settings (
to section 3.3.
) button. If the LCD Menu is locked, use the unlock procedure. Refer
) button. If the LCD Menu is locked, use the unlock procedure. Refer
12
LIP-8002/8002A
Installer Guide
section 5