Navigating The Lcd Configuration Menu; Entering Values With The Dial Pad And Softkeys; Lock/Unlock Configuration - LG-Ericsson LIP-8002/8002A Installer's Manual

iPECS

3.1 Navigating the LCD Configuration Menu

The IP phone must be idle to access the configuration menu and may be password protected
(Locked). If locked, advanced configuration parameters can be viewed, however, data entry is
not possible. Refer to
To access the configuration menu:
 Press the Settings (
To select an item:
 Dial the digit associated with the menu item or
 Use the Up/Down navigation buttons to move the cursor to the item, then press the OK
button.
To return to a previous branch in the menu:
 Press the Left navigation button.
To exit the configuration menu:
 Press the Settings (

3.2 Entering Values with the Dial Pad and Softkeys

Use the dial pad to input numbers, letters, special characters, and a period. Selecting the Mode
button switches the dial pad mode. The dial pad mode displays in the upper-right corner as
for numeric, for upper case characters and
defines the relationship between the dial pad digits and characters.
To enter characters with the dial pad, use the digit with the desired character. Press the same
digit repeatedly until the desired character appears in the LCD. After entering a character,
pause to allow the cursor to move to next character position.
Other special entries include:
To enter a period or dot (for example, to input an IP address), press asterisk, , on the
-
dial pad.
To delete a letter in front of the cursor, press the Delete button.
- To clear an entire string, press the Delete button for a while.
Prior to saving an entry, you may discard changes by pressing the Left navigation button to
move to the previous menu, or press the Settings (

3.3 Lock/Unlock Configuration

The LCD Configuration Menu can be protected for security using a four to eight digit password.
With a password assigned, exiting the LCD Menu automatically locks the menu. Configuration
section 3.3.
) button.
) button.
for lower case characters.
) button to exit the Settings menu.
10
LIP-8002/8002A
Installer Guide
Appendix E.