Lighting Illustrations - Jenn-Air 720-0511 Owner's Manual

LIGHTING ILLUSTRATIONS

MAIN BURNER LIGHTING
1. Open the top cover or lid.
2. Turn the main burner control knobs to the
"IGNITE / HI" setting. Push the control
knob in until the burner ignites; you should
hear a "clicking" sound if the electronic
ignition system is working properly. The
burner should ignite within 4 seconds (if
burner does not ignite follow match lighting
instructions on page 16).
3. Once the burner ignites, adjust the
temperature level as desired.
ROTISSERIE BURNER & SEARING
SIDE BURNER LIGHTING
1. Push and turn rear burner slowly to "INGITE / ON"
setting; you should hear a "clicking sound if the
electronic ignition system is working properly. The
burner should ignite within 4 seconds (if burner
does not ignite follow match lighting instructions on
page 18).
2. Push and turn searing side burner knob to
"IGNITE / HI" setting; you should hear a
"clicking sound if the electronic ignition system
is working properly. The burner should ignite
within 4 seconds (if burner does not ignite follow
match lighting instructions on page 17).
15