Canceling Faxes; Receiving Faxes; Receiving Faxes Automatically; Manually Receiving Faxes - Kodak ESP 9 Start Here Manual

The Fax number of the recipient display on the LCD, and the row representing the
entered Quick Dial entry is selected in the display, as shown in the illustration below.

Canceling faxes

To abort a fax after dialing the number, press

Receiving faxes

If you use your All-in-One printer to receive faxes, remember to load the bottom paper tray
with paper beforehand.
If you set Fax Auto-Answer
Each fax will be printed once it has been received. A Fax Confirmation page will be printed
if setting is enabled. See "Fax reports" on page 71.

Receiving faxes automatically

To receive faxes automatically, see Chapter 3.

Manually receiving faxes

When you hear the phone ring and want to receive a fax, press
Note:
by your telephone service provider, you may not be able to receive faxes
automatically. Review "Setting up the fax" on page 29; contact your telephone
company for additional information as needed.

Fax Phonebook entries

The Fax Phonebook stores information about frequently used fax recipients, including
name (or other word or phrase, such as a title, used to identify the recipient), fax phone
number, and Quick Dial value.
This section describes managing the Fax Phonebook from the control panel. Windows
users can manage the Fax Phonebook from Home Center software; see "All-in-One printer
Home Center software" on page 20.
Kodak ESP 9 Printer User Guide
, you will need to receive faxes manually. See below.
Off
If the phone used to receive faxes uses a voice-messaging service provided
from the control panel.
Cancel
Start
Chapter 8
on the control panel.
67