Kodak ESP 9 Start Here Manual page 9

6
Connecting to a Computer or Network
(continued)
ETHERNET CABLE CONNECTION (WIRED)
b)
c)
NONE (CAN CONNECT LATER)
a) Select Ethernet cable from the LCD display
and press OK.
b) Connect the Ethernet cable into the Ethernet port
on the back of the printer.
c) Connect the other end of the Ethernet cable into an
available port on your Ethernet router or hub.
d) Proceed to step
You can connect your printer at a later time.
a) Select None from the LCD display and press OK.
b) Proceed to step
www.kodak.com/go/aiosupport
7 .
.
7
9