Replacing The Printhead - Kodak ESP 3 User Manual

Chapter 7

Replacing the printhead

If your printhead is damaged or broken it is easy to replace yourself.
Make sure the Kodak ESP 3 All-in-One printer is on.
1
Open the printer access door.
2
Pinch the latch on the ink cartridge with your thumb and forefinger and lift it out of the
3
printhead. Remove both ink cartridges.
Unlatch the printhead by pressing the release button at the top centre of the carriage.
4
Remove the old printhead from the carriage.
5
38 Kodak ESP·3 All-in-One