Connecting The Printer To The Pc; Direct Connection To The Pc; Networked Connection To The Pc Using The Ethernet Port - Tektronix Phaser 480 Service Manual

Connecting the printer to the PC

Direct connection to the PC

1.
Turn off the printer. Turn off the PC.
2. Attach the parallel interface cable to the host computer. Attach the
other end to the printer. Alternatively, attach the serial cable to the
host computer's serial port. Attach the other end to the printer's serial
port.
3.
Turn on the printer and the PC.

Networked connection to the PC using the Ethernet port

In the Novell network the printer is connected to the network in the same
manner as the workstations using an Ethernet connection.
1. Turn off the printer.
2. Connect the interface cable to the printer's Ethernet AAUI connector.
You will need to use a network transceiver on the end of the interface
cable to adapt it to the AAUI connector.
3. Turn on the printer.
Installing the Printer and Drivers
Service Manual
2
2-11