Fru Disassembly/Assembly; Required Tools - Tektronix Phaser 480 Service Manual

Chapter
8

Required tools

FRU
Disassembly/Assembly
This section explains how to remove and replace many of the printer's Field
Replaceable Units (FRUs). This section covers procedures for FRUs that are
difficult to remove or require special handling or precautions. Refer to
Appendix A for a list of the printer's FRUs.
Magnetic tip screwdrivers; 3-inch shaft and 6-inch shaft:
®
#1 POSIDRIV
®
#2 POSIDRIV
Needle-nose pliers
Diagonal cutters
Flat-blade screwdriver
Hex wrenches:
3 mm
4 mm
Replacement cable ties
90% pure or greater isopropyl alcohol
Antistatic mat
tip – extended shank
tip – extended shank
003-0335-00
003-0336-00
003-1344-00
343-0549-00
006-7056-00
Service Manual
8-1