Printing On Preprinted Paper - Xerox Phaser 3210 User Manual

Printing on Preprinted Paper

Preprinted paper is paper that has some type of printing placed on it before it is sent through
the printer (paper that has a preprinted logo at the top of the page, for example).
Guidelines
• Letterheads must be printed with heat-resistant ink that will not melt, vaporize, or
release hazardous emissions when subjected to the printer's fusing temperature of 400°F
(205°C) for 0.1 second.
• Ink on letterhead must be non-flammable and should not adversely affect any printer
rollers.
• Forms and letterheads should be sealed in a moisture-proof wrapping to prevent changes
during storage.
• Before you load preprinted paper such as forms and letterheads, verify that the ink on
the paper is dry. During the fusing process, wet ink can come off preprinted paper.
1 1
Load letter-heads into the input tray
you want to use with the design face
up, and the bottom edge toward the
printer.
Adjust the guide to fit the width of the
paper stack.
2 2
When you print on the preprinted paper,
configure the paper source, type and
size in the software application. For
details, see page 5.3.
4.12
P M
RINT EDIA