Interface Mac-Address Offset; Inter-Subqinq-Routing - Zte ZXR10 8900 Series Command Reference Manual

ZXR10 8900 Series Command Reference (Basic Configuration Volume II)
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Example
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
30 Confidential and Proprietary Information of ZTE CORPORATION
ZXR10(config-if)#
� This example describes how to enter subinterface 100 of inter-
face fei_2/1.
ZXR10(config)#interface fei_2/1.100
ZXR10(config-subif)#
� This example describes how to set the alias of fei_1/1 to
ether1, with which enter the configuration mode of the inter-
face.
ZZXR10(config)#interface fei_1/1
ZXR10(config-if)#by name ether1
ZXR10(config-if)#exit
ZXR10(config)#interface byname ether1
ZXR10(config-if)#
byname

interface mac-address offset

Use this command to set the MAC address offset of the Ethernet
interface.
Interface configuration
interface mac-address offset <mac-offset>
no interface mac-address offset
<mac-offset>
This example describes how to set the MAC address offset of in-
terface fei_2/2 to 6.
ZXR10(config)#interface fei_2/2
ZXR10(config-if)#interface mac-address

inter-subqinq-routing

Use this command to enable or disable the ARP proxy function
between QinQ interfaces.
Superqinq interface configuration
inter-subqinq-routing {enable | disable}
enable
disable
Enable the ARP proxy function between qinq interfaces.
The MAC address offset of the interface, in
the range of 1~30, 0 by default.
offset 6
Enables the ARP proxy function between QinQ
interfaces.
Disables the ARP proxy function between
QinQ interfaces.