Zte ZXR10 8900 Series Command Reference Manual page 65

phy
include| exclude |
begin
Instructions � show ip interface is used to show the information of all in-
terfaces.
� show ip interface <interface-name>is used to show the in-
formation of the specified interface.
� show ip interface brief is used to show the brief information
of all interfaces.
� show ip interface brief <interface-name>is used to show
the brief information of the specified interface
� show ip interface brief phy is used to show the state of the
interface.
� show ip interface brief | include <line>, show ip interf
ace brief | exclude <line> and show ip interface brief |
begin <line>are used to search and display brief information
of designated interface with regular expressions. The param-
eter <line>can be the name of an interface.
Example � This example describes how to display the information of in-
terface fei_1/1.
ZXR10#show ip interface fei_1/1
fei_1/1 admini is up, physics is down, line protocol is down
Internet address 180.1.1.1, subnet mask 255.255.255.0
Broadcast address 255.255.255.255
MTU is 1500 bytes
Directed broadcast forwarding is enable
ICMP redirects are always sent
ICMP unreachable are always sent
MAC address offset is 0
Descriptions of the displayed fields are shown below.
Shows the state of the interface
include <line> is regular expression
Field
admini is up
physics is down
line protocol is up
internet address
subnet mask
broadcast address
MTU
ICMP redirect
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 Interface Configuration
Description
Whether the administration status of the
interface is available, up for available, and
down for unavailable.
Whether the administration status of the
interface is available: up for available, and
down for unavailable.
Whether the link layer protocol is available,
up for available, and down for unavailable.
IP addresses of the interfaces
Subnet mask
roadcast address, defined by the IP
address, 255.255.255.255 by default.
MTU value of the interface.
Whether the interface sends the redirect
ICMP packets.
55