Table Of Contents; Main Features; In The Stutter Mode, The Disc Is Only Played While The Button Is; Pressed - Denon DN-2600F Operating Instructions Manual

z
Main features ..................................................................7
x
Connections/Installation ...................................................7
c
Part names and functions ..........................................8 ~ 11
v
Compact discs ...............................................................11
b
Basic operation ............................................................12
n
Pitch/Brake/Platter/Key control ..........................................13
m
Next track reserve .........................................................14
,
Seamless loop/Hot start/Stutter
• ACCESSORIES
Check that the following parts are included in addition to the main unit:
q Operating instructions ...................................................1
w Connection cords for signal output (RCA) ...........................2

1 MAIN FEATURES

The DN-2600F is a double CD player equipped with a variety of
functions and rich performance characteristics. Use it for example
for DJ mixing and remixing.
Control section
1. The DN-2600F can be easily mounted on a standard 19-inch
rack.
2. Improved visibility thanks to a large fluorescent display, self-
lighting buttons and disc holder illumination.
3. Improved operability thanks to a large jog/shuttle dial and
track select knob.
Functions
1. Shockproof function protecting against external vibrations
2. Auto Level Search / Instant Start
3. Pitch Bend (Button & Jog)
4. Seamless Loop
Playback can be looped between any two positions with no break
in the sound. Two loop start points (A-1 and A-2) can be set.
5. Hot Start / Stutter
Playback can be started instantaneously from points A-1 and A-2.
In the stutter mode, the disc is only played while the button is

pressed.

6. Sampler
The sound of the CD can be sampled and played for
approximately 15 seconds. The loop, reverse, pitch adjustment,
playback level adjustment and key adjustment functions can be
used with the sampled sound.
7. Digital-Scratch
This function allows scratching in a way similar to analog discs.

2 CONNECTIONS/INSTALLATION

1. Turn off the POWER switch.
2. Connect the RCA pin cords to the inputs on your mixer.
3. Connect the control cord to the REMOTE connector on the RC-46.
CAUTION:
• Be sure to use the supplied control cord. Using another type of
cable may result in damage.
• Be sure the power is off when connecting the control cord.
Otherwise the units may not work properly.
• Never connect any remote controllers other than the RC-46.
Doing so can damage the equipment.

- TABLE OF CONTENTS -

.................................15, 16
.
Sampler/Digital scratch/Effector .................................17 ~ 20
⁄0
Memo ........................................................................21
⁄1
Programmed playback ................................................22, 23
⁄2
Random playback .........................................................24
⁄3
Preset functions and operations
⁄4
Cleaning the optical pick-up lens .......................................27
⁄5
Specifications ...............................................................27
e Remote control unit (RC-46) .............................................1
r Remote control connection cable ....................................1
18. Effector (Filter, Reverb, Flanger)
Three different effector functions can be used to create a variety
of effect sounds.
19. Brake / Platter
The playing speed can be gradually lowered to play and stop
discs with a sound similar to that of analog discs.
10. Next Track Reserve
The next track to be played can be selected so that playback
continues with no break in the sound.
11. Memo
Up to 300 sets of such data as the cue point, loop A/B points
and pitch can be stored in a permanent memory (one set of data
per track).
12. Key Control / Key Adjust
Key control function for adjusting the playback key. In addition,
the key can be adjusted automatically when the playing pitch
changes so that the key remains the same.
13. End Monitor
The ends of tracks can be monitored.
14. Program / Random playback
Up to 25 tracks can be programmed, and programs for up to six
discs can be stored in a permanent memory. Random playback
is performed for the discs in both disc holders.
15. Fader input
16. Servo Auto Stop function for Spindle Motor / Disc Holder
Auto Close
17. Preset function for setting functions according to the usage
purpose
15°
The DN-2600F will work normally when
the player unit is mounted within 15
degrees off the vertical plane at the front
panel. If the unit is tilted excessively, the
disc may not be loaded or unloaded
properly.
DN-2600F
ENGLISH
.................................25, 26
7