Denon DN-2600F Operating Instructions Manual page 18

ENGLISH
Selecting the sampler playback parameter
The playing pitch, playback level and key adjust mode can be
selected.
Set the sampler playback parameter selection mode.
1
Press the FLG/PITCH button.
Select the pitch, level or key adjust mode.
Turn the data master knob (
PUSH ENTER
2
Set the mode whose parameter you want to change.
3
Press the data master knob (
Changing the sampler playing pitch
After setting the parameter to "sampler pitch", turn the data
master knob (
8
PUSH ENTER
Turn the knob clockwise to increase the
4-
sampler playing speed, counterclockwise to
1
decrease it.
• The speed changes by 0.5% for each click of the knob.
(The adjustment range is ±16%.)
[Canceling the sampler pitch mode]
Press the data master knob (
4-
2
• The player returns to the same status as in step 2 and
other parameters can be changed.
Changing the sampler playback level
After setting the parameter to "sampler level", turn the data
master knob (
8
PUSH ENTER
Turn the knob clockwise to increase the
sampler playback level, counterclockwise
5- to decrease it.
1
• The level can be set in five steps.
NOTE:
• Depending on the recording level, clipping may occur in
the playback sound if the playback level is increased.
[Canceling the sampler level mode]
Press the data master knob (
5-
2
• The player returns to the same status as in step 2 and
other parameters can be changed.
18
— ).
8 9
SAMP Pitch?
SAMP Level?
SAMP Key.?
— ).
8 9
— ).
9
— ).
8 9
— ).
9
— ).
8 9
Sampler key adjust setting
After setting the parameter to "key adjust", turn the data
6-
1 master knob ( — ).
8 9
• Turn key adjust on or off.
[Canceling the sampler key adjust setting mode]
Press the data master knob (
6-
2
• The player returns to the same status as in step 2 and
other parameters can be changed.
Canceling the sampler playback parameter
selection mode
7
Press the FLG/PITCH button again.
Playing the sample backwards
Set the sampler reverse playback mode.
Press the FIL/REVERSE button.
1
• After pressing the FIL/REVERSE button, press the
PLAY/PAUSE button to start playing the sample
backwards, starting from the end point.
[Canceling the sampler reverse playback mode]
Press the FIL/REVERSE button again.
2
• After pressing the FIL/REVERSE button, press the
PLAY/PAUSE button to resume normal sample playback.
Playing the sampler in a loop
Set the sampler loop playback mode.
1
Press the RVB/LOOP button.
• The sample is played in a loop.
[Canceling the sampler loop playback mode]
2
Press the RVB/LOOP button again.
— ).
8 9