Seamless Loop/Hot Start/Stutter; Pressed - Denon DN-2600F Operating Instructions Manual

8 SEAMLESS LOOP/HOT START/STUTTER

Use this function to play the specified section between points A and B in a seamless loop (with no break in the sound).
Two A points and one B point can be set.
The data of the A points can be used for the hot start and stutter functions.
Starting seamless loop playback
Start playback.
1
Press the PLAY/PAUSE button.
Load the start point (A).
Press the A-1 (or A-2) button.
A
1 2 LOOP
Lit
• The seamless loop mode is set as soon as point A is set.
• The " " indicator lights and "LoadA" is displayed
LOCK
2
on the character display while the A point data is being
loaded.
The seamless loop mode cannot be set when in the next
track mode. If you wish to set it, turn the next track
mode off.
Data cannot be loaded for both A1 and A2 at the same
time.
Depending on the conditions, it may not be possible to
load points A1 and A2. In this case, "Not Load" is
displayed.
Set the end point (B).
Press the B (B-LOOP) button.
B
A1 B
Start point End point
When the end point (B) is set, the
disc is played from the start point
(A) with no break.
Start point End point
3
After this, the disc is played from
the start point (A) to the end point
(B) with no break.
Seamless loop
• If the B (B-LOOP) button is pressed again after the B
point has been set, the B point is reset (moves).
• Whenever the A-1 (or A-2) button is pressed while in the
seamless loop mode, playback starts over from the A
point.
• When point B is set for point A-1 and the A-2 button is
pressed, point B is cleared. In the same way, when point
B is set for point A-2 and the A-1 button is pressed, point
B is cleared.
1 2
or
Lit
Lit
or
A2 B
Lit
Lit
Temporarily canceling seamless looping
Press the EXIT/RELOOP button during seamless looping.
(EXIT mode)
4 Start point
• When the end point (B) is reached, playback continues,
without returning to the start point (A).
Replaying a seamless loop
Press the EXIT/RELOOP button or the B (B-LOOP) button
during normal playback. (When the B (B-LOOP) button is
pressed, that point is set as the new loop end point (B).)
5
Start point
• Playback returns to the start point (A) and seamless
looping resumes.
Clearing the start (A) and end (B) points
While pressing the LOOP (FLIP) button, press the A button
you want to clear (A-1 or A-2) for at least 2 seconds.
LOOP A
1 2
6
• The A-1 point (or A-2 point) and the B point are cleared.
NOTE:
• When the disc holder is opened, the start (A) and end (B)
point settings are cleared.
ENGLISH
Flashing Lit
EXIT EXIT
End point
B
End point
Press the EXIT/RELOOP
or B button.
Off Off
1 or 2
A1 B A2 B
or
Off
Off
15