MEMO BRAKE PITCH KEY. CONT. CONT. PROG. PROG. BRAKE BRAKE CONT. / SINGLE TIME CONT. / SINGLE TIME LOOP LOOP DN-2600F DN-2600F A1 B SAMP A1 B SAMP LOOP LOOP PROGRAM PITCH BEND PROGRAM PITCH BEND NEXT TR. START END MON.
BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL. In order to prevent electric shock, do not open the top cover. If problems occur, contact your DENON dealer. 3. Do not place anything inside Do not place metal objects or spill liquid inside the CD player.
SAFETY INSTRUCTIONS Read Instructions – All the safety and operating Power-Cord Protection – Power-supply cords should be instructions should be read before the appliance is routed so that they are not likely to be walked on or operated. pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience Retain Instructions –...
Page 4
SVENSKA NEDERLANDS ESPAÑOL FRANCAIS DEUTSCH ENGLISH NOTE ON USE / HINWEISE ZUM GEBRAUCH / OBSERVATIONS RELATIVES A L’UTILISATION NOTAS SOBRE EL USO / ALVORENS TE GEBRUIKEN / OBSERVERA • Do not let foreign objects in the set. • Keine fremden Gegenstände in das Gerät •...
Page 5
FRANCAIS ESPAÑOL NEDERLANDS SVENSKA Main Unit / Hauptgerät / Unité principale / Unidad principal / Hoofdtoestel / Huvudenhet / DN-2600F 7 x 10 hole Loch 7 x 10 Trou de 7 x 10 Orificio de 7 x 10 Opening 7 x 10 Hål, 7 x 10...
Page 6
ENGLISH DEUTSCH FRANCAIS ESPAÑOL NEDERLANDS SVENSKA • DECLARATION OF CONFORMITY COMPACT COMPACT • Use compact discs that include the mark. We declare under our sole responsibility that this product, to which DIGITAL AUDIO CD’s with special shapes (heart-shaped CD’s, this declaration relates, is in conformity with the following standards: octagonal CD’s etc.) cannot be played on this set.
Connection cords for signal output (RCA) ………………………2 r Remote control connection cable ………………………………1 1 MAIN FEATURES The DN-2600F is a double CD player equipped with a variety of 18. Effector (Filter, Reverb, Flanger) functions and rich performance characteristics. Use it for example Three different effector functions can be used to create a variety for DJ mixing and remixing.
ENGLISH 3 PART NAMES AND FUNCTIONS • The fader can be activated using the switch circuit shown on (1) DN-2600F Front Panel the diagram below. POWER button ( OFF) ¢ £ SW 1 • Press this button to turn the power on.
ENGLISH Jog dial (inner side) Track select/Data master knob • In the search mode, turn this dial during the search operation – /PUSH ENTER) to move the playing point in units of frames. • Turn this knob to select the next track to be played. •...
• When this button is pressed during playback in the next track • Connect this connector to the REMOTE connector on the mode, the selected track is search for. When pressed again DN-2600F (main unit) using the included control cord. after the search operation, playback starts. (5) Display...
ENGLISH Time mode indicators 4 COMPACT DISCS • When the TIME button is pressed, the time display switches 1. Precautions on handling compact discs as follows: • Do not allow fingerprints, oil or dust to get on the surface of the When “ELAPSED”...
ENGLISH 5 BASIC OPERATION PLAY/PAUSE and CUE Starting playback from the Middle of a track (Manual Search) The operation switches between playback and pause each time the PLAY/PAUSE button is pressed. When the track is selected with the track select knob and the When the CUE button is pressed during playback, the pickup PLAY/PAUSE button is pressed, playback starts from the beginning returns to the position at which playback was started.
ENGLISH 6 PITCH/BRAKE/PLATTER/KEY CONTROL There are two ways to change the playing speed. • Adjust the Pitch using the pitch slider (±10% and ±16%). • The PITCH BEND button or jog dial can be used to temporarily change the pitch. The playing speed can be changed greatly to achieve effects similar to those achievable with analog discs.
ENGLISH 7 NEXT TRACK RESERVE With this function, the blank sections between tracks when in the continuous play mode can be cut (AUTO MODE). It is also possible to freely search for and select the next track to be played while the current track is playing so that playback continues with no break in the sound (MANUAL MODE).
ENGLISH 8 SEAMLESS LOOP/HOT START/STUTTER Use this function to play the specified section between points A and B in a seamless loop (with no break in the sound). Two A points and one B point can be set. The data of the A points can be used for the hot start and stutter functions. Starting seamless loop playback Temporarily canceling seamless looping Start playback.
ENGLISH Clearing all the seamless loop settings Hot starting Hot starting is possible when no end point (B) has been set in the Press the LOOP (FLIP) button for at least 2 seconds. seamless loop mode or when in the exit mode. LOOP With the data for A-1 or A-2 loaded, press the A-1 (or A-2) LOOP...
ENGLISH 9 SAMPLER/DIGITAL SCRATCH/EFFECTOR DN-2600F’s ASP (Audio Signal Processor) has three modes - sampler, digital scratch and effector - that can be selected freely according to the purpose. (1) Sampler 2 Sampler • The sound of the disc can be recorded/played for approximately Recording samples 15 seconds.
Page 18
ENGLISH Selecting the sampler playback parameter Sampler key adjust setting The playing pitch, playback level and key adjust mode can be After setting the parameter to “key adjust”, turn the data selected. master knob ( — • Turn key adjust on or off. Set the sampler playback parameter selection mode.
ENGLISH (2) Digital scratch (3) Effector Using the scratch function Setting the effector mode Set the ASP to the scratch mode. Set the ASP to the effector mode. • Refer to “Selecting the ASP mode” on page 17. • Refer to “Selecting the ASP mode” on page 17. In the effector mode, the playing level is 6dB lower than Check that it is possible to start scratching.
Page 20
ENGLISH Select the high frequency range to be filtered. Start reverb playback. Turn the data master knob ( — Press the ON/OFF button at any point between steps 1-1 • If the data master knob ( — ) is pressed again, the and 2-2.
• The data is cleared and the “ ” indicator turns MEMO Two units of the DN-2600F are required (one master, one slave). off. • All the data in the memory can be cleared at once using Connect the RC-46 remote control signal transfer connectors the “Memory All Clear”...
ENGLISH 11 PROGRAMMED PLAYBACK Use this function to program the tracks to play in a certain order. Up to 25 tracks per disc can be programmed. Programs for up to six discs can be stored in the permanent memory. Inputting programs Changing programs Set the program operation selection mode.
ENGLISH Playing programs Calling out programs from the memory The “ ” indicator lights when a disc for which a program PROG. In the program operation selection mode, select is stored in the memory is loaded in the player. “Program On?”. Turn the data master knob ( —...
ENGLISH 12 RANDOM PLAYBACK Use this function to play the tracks in random order. Random playback is performed for the discs in both disc holders. Setting the random play mode Canceling random playback Press the program button and display “Random Off?”. Set the program operation selection mode.
13 PRESET FUNCTIONS AND OPERATIONS (1) Preset functions Use these functions to preset the DN-2600F’s operation modes. These presettings are stored in a permanent memory, so they are not cleared even when the power is turned off. The functions shown on the table on page 26 can be preset. Set these judiciously according to your usage purpose for more efficient operation.
ENGLISH (3) Detailed Description of Preset Functions (“*” indicates the default setting.) Auto Cue ON/OFF * “AutoCue ON” The cue point is detected at a sound level of –54 dB. “AutoCue OFF” Cue detection is not performed. Brake Time: Set the operating time for the BRAKE and PLAT-S modes. “BK Time S”...
14 CLEANING THE OPTICAL PICK–UP LENS Necessity of cleaning might be differed on location and frequency of use each player. It is recommend to clean the pick–up lens once a week. We recommend using DENON’s AMC–22 PICK–UP LENS CLEANER. 15 SPECIFICATIONS GENERAL...
Page 28
Denon France S.A. 3 Boulevard Ney, 75018 Paris Tel: 44-89-68-69 F.R. Germany Denon Electronic GmbH An Der Landwehr 19, 41334 Nettetal Tel: +49 2157 12 08 78 Fax: +49 2157 12 08 13 Greece KINOTECHNIKI LTD. 47 Stournara Str., Athens Tel: 380-6998 Hong Kong DENON ASIA COMPANY LTD.
Page 29
14-14, AKASAKA 4-CHOME, MINATO-KU, TOKYO 107-8011, JAPAN Telephone: (03) 3584-8111 Cable: NIPPON COLUMBIA TOKYO Telex: JAPANOLA J22591 Printed in Japan 511 3534 002...