Voice Config - THOMSON TG784-SIP Cli Reference Manual

voice Commands

voice config

Configure the general parameters
SYNTAX:
voice config
where:
autofxo
digitrelay
click2dial_ports
rtp_portrange
sign_internal
static_intf
intf
secondintf
endofnumber
countrycode
delayeddisconnect
E-DOC-CTC-20080619-0007 v1.0
[autofxo = <{disabled|enabled}>]
[digitrelay = <{auto|inband|rfc2833|
signalling}>]
[click2dial_ports = <{FXS1|FXS2|DECT1|DECT2|
DECT3|DECT4|DECT5|all}>]
[rtp_portrange = <string>]
[sign_internal = <{external|internal}>]
[static_intf = <{disabled|enabled}>]
[intf = <{loop|Internet|LocalNetwork}>]
[secondintf = <{loop|Internet|LocalNetwork}>]
[endofnumber = <{#|*|none}>]
[countrycode = <number>]
[delayeddisconnect = <{enabled|disabled}>]
[delayeddisconnecttimer = <number>]
[ringmuteduration = <number>]
[feature-mngt = <{internal|external}>]
[nocallsetupmsg = <{never|unav-numb}>]
[syslogscope = <{none|only-stats|only-dm-
events|only-msgs|all}>]
Automatically make FXO calls when not
registered
Set the digit relay mode
Set the click to dial port
The RTP port range <[startport]-[endport]>
Signalling for local calls is kept local or external
Use a static (configured) interface to look for the
IP address or not
The name of a IP interface to be used for VOIP
traffic.
The name of a backup IP interface to be used for
VOIP traffic.
The end of number character for dialled number
starting with a cipher
Local countrycode
Enable or disable the delayed disconnect feature
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
803