Table of Contents
Advertisement
eth filter operand viddelete
eth filter template add
eth filter template config
eth filter template delete
eth filter template flush
eth filter template list
eth filter template ruleadd
eth filter template ruledel
eth filter template rulemodify
eth filter template setpriority
eth filter template setvid
eth flush
eth ifadd
eth ifattach
eth ifconfig
eth ifdelete
eth ifdetach
eth iflist
eth switch group flush
eth switch group list
eth switch group move
eth switch info
eth switch mirror capture
eth switch mirror egress
eth switch mirror ingress
eth switch qos config
eth switch qos ifconfig
304
Delete a VID from the set.
Add a filter.
Config a filter.
Delete a filter.
Remove all filters.
Display the filters.
Connect an operand rule with a filter.
Remove an operand rule from a filter.
Modify an operand rule from a filter.
Action: enable/disable priority
derivation
Action: enable/disable VID derivation
Flush all ETH interfaces.
Create a new ETH interface.
Attach an ETH interface.
Modify an ETH interface.
Delete an ETH interface.
Detach an ETH interface.
Display the ETH interfaces.
To set all ports to the default settings
(all ports in group 0).
List all configured groups.
Move a specified port to a specified
group.
Display switch capabilities
Define the specified port to be the
Mirror Capture Port.
Enable or disable the specified port to
be a Transmitted Port Mirroring.
Enable or disable the specified port to
be a Received Port Mirroring.
Configure common qos parameters.
Configure per port qos parameters.
eth Commands
see page 379
see page 380
see page 381
see page 382
see page 383
see page 384
see page 385
see page 386
see page 387
see page 388
see page 389
see page 390
see page 391
see page 392
see page 393
see page 394
see page 395
see page 396
see page 397
see page 398
see page 399
see page 400
see page 401
see page 402
see page 403
see page 404
see page 405
E-DOC-CTC-20080619-0007 v1.0
Advertisement
Table of Contents
