Table of Contents
Advertisement
eth Commands
eth switch shaper ifconfig
Configure per port shaper parameters.
SYNTAX:
eth switch shaper ifconfig
where:
port
ingress
shaper
state
speed
burstsize
E-DOC-CTC-20080619-0007 v1.0
port = <number{1-4}>
ingress = <{enabled|disabled}>
shaper = <number{0--1}>
[state = <{enabled|disabled}>]
[speed = <number{64000-100000000}>]
[burstsize = <{}>]
The port.
Ingress port = enabled; egress port = disabled.
The shaper instance.
Enable/disable shaping.
Speed in bits/sec.
Burst size in KBytes.
REQUIRED
REQUIRED
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
409
Advertisement
Table of Contents
