Sycard Pcctest 450/460 Cardbus Card (Optional); Table 3-4. Sycard Pcctest Commands - HP Pavilion xz200 Service Manual

Beep Code Message
(None) RAM ERROR AT LOCATION xxxxxx :
WROTE : xxxx
READ : xxxx
(None) PARITY ERROR AT UNKNOWN
LOCATION
(None) PARITY ERROR AT LOCATION xxxxxx
(None) NO INTERRUPTS FROM TIMER 0
(None) UNEXPECTED AMOUNT OF MEMORY -
RUN SCU
(None) CLOCK NOT TICKING CORRECTLY
(None) TIME/DATE CORRUPT - RUN SCU
(None) MACHINE IS LOCKED - TURN KEY
(None) BOOT SECTOR 0 HAS CHANGED
(None) Suspend-to-Disk partition MISSING!
(None) Hard Disk ERROR!
(None) Suspend-to-Disk partition signature NOT
FOUND!
(None) Suspend-to-Disk partition size TOO
SMALL!
(None) MEMORY SIZE HAS CHANGED --
REBOOTING

Sycard PCCtest 450/460 CardBus Card (Optional)

The PCCtest 450 and 460 CardBus Cards (version 1.05) available from Sycard Technology are the
only recommended diagnostic tool that tests the functionality of the PCMCIA slots using a PCMCIA
card. Each is a Type II PC Card that works with compatible test software to exercise PCMCIA
functions. (For details, see the Sycard Technology Web site: http://www.sycard.com.)
The PCCtest product contains these components:
•
PCCtest 450 or 460 (revision 1.05) PC Card.
•
PCCtest 450/460 test software disk. (Software updates are available at the Sycard Technology
web site: http://www.sycard.com.)
•
Configuration headers (PC Card/16-bit and CardBus/32-bit) that attach to the card.
You will also need a CardBus extender card (such as the Sycard PCCextend 70) to avoid wear on the
Sycard PCMCIA connector.
The Sycard PCCtest 450 and 460 provide the following tests. See the Sycard documentation for
details about running the tests.
zt1100/xz200/xt1500
(technology code IC)
3-26 Troubleshooting and Diagnostics

Table 3-4. Sycard PCCtest Commands

Slot PCMCIA PC Card (16-bit) test
(PC Card configuration header)
N/A PCT450 -bc1b -0 -v
Description
RAM failed during memory test at the indicated
location.
Parity error during memory test at unknown
location.
Parity error during memory test at the indicated
location.
Timer 0 of the clock timer controller does not
generate system interrupts correctly.
System memory size does not match the CMOS
record.
System clock does not work correctly.
Time/date information in CMOS is invalid.
Keyboard operation is locked.
Hard disk boot sector has been changed, probably
because of a virus attack.
No Suspend-to-Disk partition found.
Access to the Suspend-to-Disk partition failed.
No Suspend-to-Disk partition signature found.
Suspend-to-Disk partition has insufficient capacity.
Memory size has changed after previous Suspend-
to-Disk operation.
CardBus (32-bit) test
(CardBus configuration header)
TESTCB -b92b -0 –v
Technology Code IC)