Table of Contents
Advertisement
3
If you press and hold
ing DAB1, 2, or 3, it starts searching for
ensemble automatically.
By selecting the mode in the "Changing the
Display Mode" (page 104), the display shows
the status of the broadcasting stations that
have been received as follows:
Channel No. Display: the channel numbers of
received stations are displayed.
Ensemble Label Display: the Ensemble Label
of received station is displayed.
Service Label Display: the Ensemble Label is
displayed for 2 seconds and then the Service
Label is displayed after receiving the
broadcasting station.
Component Label Display: the Ensemble
Label is displayed for 2 seconds, then the
Service Label is displayed for 2 seconds, and
then the display is changed to the Component
Label after receiving the broadcasting station.
Dynamic Label Display: the Ensemble Label is
displayed for 2 seconds, then the Service
Label is displayed for 2 seconds, and then the
display is changed to the Dynamic Label after
receiving the broadcasting station.
Frequency Display : the frequency of received
stations are displayed.
• When you use DAB, you can select a desired
ensemble which may contain one or more services,
any of which can be received. Furthermore, each
service contains a Service Component, which itself
can contain any number of Primary or Secondary
services, depending on the Service Component.
Several different kinds of services can be selected
therefore.
Autogood products internet store http://130.com.ua
or
while receiv-
Press and hold
or
93
.
-
EN
Advertisement
Table of Contents
