Remote Control Operation; Notes On Using Remote Control; Battery Replacement - Alpine DVI-9990R Owner's Manual

Remote Control

Remote Control Operation

Notes on Using Remote Control

Point the remote control transmitter at the remote control sensor.
• Point the remote control at the remote sensor within about 2 meter. When
connected to the TMI-M990, if the remote control is pointed towards the
remote control sensor of the TMI-M990, the operation will be received in the
same way.
• It may not be possible to operate the remote control unit if the remote control
sensor is exposed to direct sunlight.
• The remote control is a small, light weight precision device. To avoid damage,
short battery life, operational errors and poor button response, observe the
following.
- Do not apply any shock.
- Do not put in a trouser pocket.
- Keep away from food, moisture and dirt.
- Do not place in direct sunshine.
Remote Control Operation

Battery Replacement

Applicable battery: Use two "AAA" sized dry batteries or equivalent.
1
Opening the battery cover.
Push on the cover and slide it as indicated by the arrows
then the cover will be removed.
112
-
EN
Autogood products internet store http://130.com.ua
Remote control sensor