Table of Contents
Advertisement
<GENERAL setup standard operation>
1
Press and hold F
seconds.
2
Press 1 ( ) or 5 ( ), select the GENERAL
setup and press 2 (ENT).
The mode changes to GENERAL setup
mode.
3
Press 1 ( ) or 5 ( ), select the required group
from the GENERAL setup mode, and press
2 (ENT).
The group is finalized. (Example: selecting ILLUMI.)
4
Press 1 ( ) or 5 ( ), select the required
setting item, and press 2 (ENT).
The setting item is finalized. (Example: selecting
DIMMER)
• If V OUTPUT is selected in step 3, the operation is
finished with step 4.
5
Press 1 ( ) or 5 ( ), change the settings and
press 2 (ENT).
The setting content is finalized. (Example: AUTO or
OFF)
• If CALENDAR is selected in step 4, and if 1 ( ),
5 ( ), 3 ( ), 4 ( ) is then entered after step 5 then the
date can be entered. Press 2 (ENT) to finalize the date.
• Press 6 (RTN) in the setting mode to return to the
previous display.
Autogood products internet store http://130.com.ua
SETUP for more than 3
•
Continued
83
-
EN
Advertisement
Table of Contents
