Table of Contents
Advertisement
DVD Audio/DVD Video/Video CD
The following pages include supplementary information for pages 30
Supplementary
to 49. Please refer to these pages.
information
TITLE
Playing DVD Audio/
DVD Video/Video
CD
50
-
EN
Autogood products internet store http://130.com.ua
Description
Play Position Memory Function:
This function remembers the last position on the disc before
the unit power or the Ignition switch was turned OFF or the
source was changed. When playback continues, it begins
from the point where playback stopped when the power was
turned OFF or the source was changed. Depending on the
disc it may not return properly. If the disc is changed, the
play position memory is cleared.
A DVD can be programmed to ignore certain functions.
Therefore, not all the operations described in this manual,
may be accepted by a particular DVD.
Not all functions will operate for every DVD. See the
individual DVD's instructions for details on the features
supported.
Fingerprints on a disc may adversely affect playback. If a
problem occurs, remove the disc and check for fingerprints
on the playback side. Clean the disc if necessary.
When using the remote control, be careful to press one
button at time. Pressing multiple buttons at the same time
may cause erroneous operation.
If you try to perform an invalid operation (based on the type
of disc being played), the following mark is displayed on the
monitor screen:
The reverse side of a double-sided DVD will not be played
automatically.
Remove the disc, turn it over, and reinsert it.
DO NOT insert discs containing maps for the navigation
system. Doing so could result in damage.
"DISC ERROR" appears on the monitor display if a non-
compatible disc is loaded, if the disc is loaded upside-down
or if the disc is scratched or invalid or dirty. Press
main unit to open the display and remove the disc.
Related page
Page 30
Page 30
Page 30
Page 30
Page 30
Page 30
Page 30
Page 30
Page 30
on the
Advertisement
Table of Contents
