Table of Contents
Advertisement
Indication for DVD Audio/
DVD Video/Video CD
NO DISC
(Front panel display)
• No disc is inserted.
- Insert a disc.
• Although a disc is inserted, "NO DISC"
is displayed and the unit does not start
to play or eject the disc.
- Remove the disc by the following:
1) Press
for at least 3 seconds.
(Monitor display)
• Remote control operation is not
possible.
- For some discs or playing modes,
certain operations are not possible.
This is not a malfunction.
Regional Code
Violation
(Monitor display)
• Disc does not match regional code
number.
- Load a disc that matches the regional
code number.
High-Temp
(Monitor display)
• Protective circuit is activated to high
temperature.
- The indicator will disappear when the
temperature returns to within operation
range.
- Leave the power OFF until the
temperature decreases and then turn
the power ON again.
Autogood products internet store http://130.com.ua
NO SUPPORT
(Front panel display)
HI-TEMP
(Front panel display)
Loading Error
(Monitor display)
Eject Error
(Monitor display)
• Mechanism error.
1) Press
and eject the disc.
If not ejecting, consult your Alpine dealer.
2) When the error indication remains after
ejecting, press
again.
If the error indication still does not turn off
after pressing
for a few times, consult
your Alpine dealer.
Disc Error
(Monitor display)
• Scratched disc, contaminated disc/poor
recording/disc incompatible with this
unit
- Press .
- Change the disc.
LOADING ERROR
(Front panel display)
EJECT ERROR
(Front panel display)
DISC ERROR
(Front panel display)
127
-
EN
Advertisement
Table of Contents
