Related Manuals for Alpine CDE-173EBT
Summary of Contents for Alpine CDE-173EBT
- Page 1 CD/USB RECEIVER WITH ADVANCED BLUETOOTH CDE-173EBT CD/USB RECEIVER CDE-170E DIGITAL MEDIA RECEIVER WITH ADVANCED BLUETOOTH UTE-73EBT • OWNER’S MANUAL Please read before using this equipment. Printed in Thailand 68-40368Z02-A (Y-D)
- Page 2 Caution BLUETOOTH wireless technology is used, but IN NO EVENT SHALL ALPINE BE LIABLE FOR ANY security may not be enough depending on the INCIDENTAL, INDIRECT OR CONSEQUENTIAL setting. Be careful when communicating using DAMAGES OR OTHER DAMAGES INCLUDING, BLUETOOTH wireless technology.
-
Page 3: Warning
DO NOT BLOCK VENTS OR RADIATOR WARNING PANELS. Doing so may cause heat to build up inside and may result in fire. USE THIS PRODUCT FOR MOBILE 12V WARNING APPLICATIONS. Use for other than its designed application may This symbol means important instructions. result in fire, electric shock or other injury. - Page 4 HALT USE IMMEDIATELY IF A PROBLEM APPEARS. Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Centre for repairing. HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.
-
Page 5: Table Of Contents
Connection ........31 Playing a Disc (CDE-173EBT/ CDE-170E only) . . . 13 Installation . -
Page 6: Guide To Parts And Controls
Guide to Parts and Controls Main unit Front panel release button (browse) (pages 12, 14) Enter the browse mode during playback. (Not available when a USB device in Android Enter the call menu. Receive/end a call. mode or iPod is connected.) Press and hold for more than 2 seconds to Select PTY in RDS. - Page 7 (shuffle) (page 17) (Not available when a USB device in Android Disc slot (CDE-173EBT/ CDE-170E only) mode is connected.) Display window MIC (CDE-173EBT/ UTE-73EBT only) (page (disc eject) (CDE-173EBT/ CDE-170E only) VIEW Change display items. USB port (scroll) SOURCE Press and hold to scroll a display item.
-
Page 8: Getting Started
Resetting the Unit Getting Started Before operating the unit for the first time, or after replacing the car battery or changing connections, you must reset the unit. To cancel the demonstration (DEMO) display, see page 19. Press and Number button 6 for more For the connection/installation, see page than 2 seconds. -
Page 9: Preparing A Bluetooth Device
Perform pairing on the BLUETOOTH To display the clock device so it detects this unit. Press VIEW. Select [CDE-173EBT] [UTE-73EBT] (your model name) shown in the display of the Preparing a BLUETOOTH Device BLUETOOTH device. If your model name does not appear, repeat (CDE-173EBT/ UTE-73EBT only) from step 2. - Page 10 • If BLUETOOTH Auto Pairing is not established, see To connect the last-connected device from “Preparing a BLUETOOTH Device (CDE-173EBT/ UTE- this unit 73EBT only)” (page 9). Activate the BLUETOOTH function on the BLUETOOTH device.
-
Page 11: Connecting A Usb Device
To listen to the radio, press SOURCE to select To connect an iPod/iPhone, use the USB [TUNER]. connection cable for iPod (not supplied). (CDE-173EBT/ UTE-73EBT only) Storing automatically Press /A.ME to change the band (FM1, FM2, FM3, AM1 or AM2). -
Page 12: Using Radio Data System (Rds)
Using Radio Data System (RDS) Selecting program types (PTY) Press (browse) during FM reception. Rotate the control dial until the desired program type appears, then press it. The unit starts to search for a station broadcasting the selected program type. Type of programs NEWS (News), AFFAIRS (Current Affairs), INFO (Information), SPORT (Sports), EDUCATE... -
Page 13: Playback
• Playback of the following files is not supported. MP3/WMA/FLAC/AAC*: – copyright-protected files Playback – DRM (Digital Rights Management) files – Multi-channel audio files Playing a Disc (CDE-173EBT/ CDE- MP3/WMA/AAC*: – lossless compression files 170E only) * CDE-173EBT/ UTE-73EBT only Insert the disc (label side up). -
Page 14: Searching And Playing Tracks
Press SOURCE to select [BT AUDIO]. Searching a track by name Operate the audio device to start Not available when a USB device in Android playback. mode or iPod is connected. Adjust the volume on this unit. During CD or USB playback, press (browse) to display the list of search Notes categories. -
Page 15: Handsfree Calling (Via Bluetooth Only) (Cde-173Ebt/ Ute-73Ebt Only)
Rotate the control dial to select a You can connect two cellular phones to the unit. number from the number list, then press For details, see “Preparing a BLUETOOTH Device (CDE-173EBT/ UTE-73EBT only)” (page 9). The phone call starts. From the call history Press... -
Page 16: Available Operations During Call
To reduce echo and noise (Echo Canceler/ By redial Noise Canceler Mode) Press and hold MIC. Press Settable mode: [BTP EC/NC 1], [BTP EC/NC 2]. When two cellular phones are connected to To switch between handsfree mode and the unit, rotate the control dial to select handheld mode either phone, then press it. -
Page 17: Useful Functions
Using Siri Eyes Free (CDE-173EBT/ Useful Functions UTE-73EBT only) Siri Eyes Free allows you to use an iPhone Adjusting Bass Level/ Mid Level/ handsfree by simply speaking into the Treble Level/ Subwoofer Level/ microphone. This function requires you to connect an iPhone to the unit via BLUETOOTH. - Page 18 • When connecting the iPhone to the unit via USB, do not activate Siri with the iPhone. Siri Eyes Free may not function properly, or may quit. • There is no audio sound while Siri Eyes Free is activated.
-
Page 19: Settings
/SETUP for at least 2 clock is displayed.) Checks/updates the firmware version. For seconds. details, consult your nearest Alpine dealer. Rotate the control dial to select the setup FW VERSION (firmware version) category, then press it. Displays current firmware version. -
Page 20: Audio Setup (Audio)
Setting contents: [WIDTH <Q>], [CENTER Changes the display brightness: FREQ], [LEVEL]. [OFF], [ON], [AUTO]*, [CLOCK]. BALANCE * CDE-173EBT/ UTE-73EBT only Adjusts the sound balance: [R 15] – [0] – [L 15]. ([AUTO] is available only when the illumination control lead is connected, and FADER the head light is turned on.) -
Page 21: Bluetooth Setup (Bluetooth)
Adjustable color range: [0] – [32] Starts BLUETOOTH pairing automatically ([0] cannot be set for all color ranges). when iOS device version 5.0 or later is DISP COLOR (display color) (CDE-173EBT/ UTE- connected via USB: [ON], [OFF]. 73EBT only) BT IN (page 10) -
Page 22: Additional Information
Compact Disc (CD) standard, Updating the Firmware therefore, these discs may not be playable by this unit. To update the firmware, visit the Alpine website. http://www.alpine-asia.com • Discs that this unit CANNOT play – Discs with labels, stickers, or sticky tape or Notes paper attached. -
Page 23: Maintenance
Please note that the use of this accessory with iPod or iPhone may affect wireless performance. If you have any questions or problems concerning your unit that are not covered in this manual, consult your nearest Alpine dealer. -
Page 24: Specifications
Bit depth: 16 bit, 24 bit Tuning range: Sampling rate: 44.1 kHz, 48 kHz 531 kHz – 1,602 kHz (at 9 kHz step) AAC (.m4a) (CDE-173EBT/ UTE-73EBT only) Antenna (aerial) terminal: Bit rate: 8 kbps – 320 kbps External antenna (aerial) connector Sampling rate: 11.025 kHz –... - Page 25 Bluetooth SIG, as obstacles between devices, magnetic fields around a microwave oven, static electricity, reception Inc. and any use of such marks by Alpine sensitivity, antenna (aerial)’s performance, operating Electronics, Inc. is under license. system, software application, etc.
-
Page 26: Troubleshooting
The connectors are dirty (page 23). Installation” (page 30). If the problem is not solved, please contact your The display disappears while the unit is authorized Alpine dealer for assistance. operating. [BLACK OUT] is set to [ON] (page 20). General The display/illumination flashes. - Page 27 CD playback Operations for skipping an album, skipping items (Jump mode), and searching a track by The disc does not play. name cannot be performed. Defective or dirty disc. These operations cannot be performed when The CD-R/CD-RW is not for audio use (page a USB device in Android mode or iPod is 22).
- Page 28 The front speakers are not connected to the The sound skips during playback of a unit. BLUETOOTH audio device. – Connect the front speakers to the unit. The Reduce the distance between the unit and the ringtone is output only from the front BLUETOOTH audio device.
-
Page 29: Messages
Make sure the USB device or USB cable is If these solutions do not help improve the securely connected. situation, consult your nearest Alpine dealer. If you take the unit to be repaired because of CD USB NO MUSIC: There is no playable file. -
Page 30: Connection/Installation
• Choose the installation location carefully so that the unit will not interfere with normal driving operations. For CDE-173EBT/ UTE-73EBT • Avoid installing the unit in areas subject to dust, dirt, excessive vibration, or high temperature, such as in direct sunlight or near heater ducts. -
Page 31: Connection
*1 Whether in use or not, route the microphone input cord such that it does not interfere with driving operations. Secure the cord with a clamp, etc., if it is installed around your feet. For details on installing the microphone, see “Installing the microphone (CDE-173EBT/ UTE-73EBT only)” (page 34). - Page 32 To steering remote control interface box. You can operate this unit from the vehicle’s Right Rear (+) Speaker Output Lead control unit when an Alpine Steering Remote (Violet) Control Interface Box (optional) is connected. For details, contact your Alpine dealer.
- Page 33 • If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various noise suppressors, contact them for further information. • Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.
-
Page 34: Installation
Installing the microphone (CDE- Installation 173EBT/ UTE-73EBT only) To capture your voice during handsfree calling, Removing the protection collar and the you need to install the microphone bracket Before installing the unit, remove the protection collar and the bracket from the unit. Pinch both edges of the protection collar , then pull it out. - Page 35 • Before installing, make sure the catches on makes of Japanese cars. In such a case, consult both sides of the bracket are bent inwards your Alpine dealer. 2 mm (3/32 in). TOYOTA • For Japanese cars, see ”Mounting the unit in a Japanese car”...
- Page 36 About the Rules of Bluetooth Electromagnetic Radiation Regulation Thailand This telecommunication equipment is in compliance with NTC requirements. Singapore Complies with IDA Standards DA10459...
- Page 40 California 90501, U.S.A. CS 52016 – Villepinte Phone 1-800-ALPINE-1 (1-800-257-4631) 95 945 Roissy CDG cedex FRANCE ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD. Phone : + 33(0)1 48 63 89 89 161-165 Princes Highway, Hallam Victoria 3803, Australia ALPINE ITALIA S.p.A.