Alpine CDA-7842R Owner's Manual

Fm/mw/lw/rds tuner/cd player/ fm/mw/lw/rds compact disc receiver

Hide thumbs Also See for CDA-7842R:

Service manual (76 pages)

Table Of Contents

Table of Contents

Quick Links

Summary of Contents for Alpine CDA-7842R

Page 1 MUTE R.TEXT P.PTY M.I.X. SCAN (CDA-7944R) CDA-7944R/ CDA-7842R FM/MW/LW/RDS Tuner/CD Player/ FM/MW/LW/RDS Compact Disc Receiver OWNER'S MANUAL Please read this manual to maximize your enjoy- ment of the outstanding performance and feature capabilities of the equipment, then retain the manual for future reference.
Page 2 Tel.: 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF CANADA, INC. Suite 203, 7300 Warden Ave. Markham, Ontario L3R 9Z6, Canada Tel.: 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD. 6-8 Fiveways Boulevarde Keysborough, Victoria 3173, Australia Tel.: (03) 9769-0000 ALPINE ELECTRONICS GmbH Kreuzerkamp 7-11 40878 Ratingen, Germany Tel.: 02102-45 50...
Page 3 WARNING The exclamation point within an equilateral triangle and "WARN- ING" are intended to alert the user to the presence of important oper- ating instructions. Failure to heed the instructions will result in severe injury or death. DO NOT DISASSEMBLE OR ALTER. Doing so may lead to accident, fire or electric shock.
Page 4 WARNING English HALT USE IMMEDIATELY IF A PROB- LEM APPEARS. When problems occur such as a lack of sound or video, foreign objects inside the unit, smoke coming out, or noxious odors, stop use immediately and contact the dealer where you bought the equip- ment.
Page 5 WARNING DO NOT USE THIS EQUIPMENT FOR PURPOSES OTHER THAN STATED FOR THE VEHICLE. Failure to do so may result in electric shock or injury. DO NOT PLACE FOREIGN OBJECTS IN INSERTION SLOTS OR GAPS. Do not insert hands, fingers or foreign objects in the disc or cassette inser- tion slots, or in gaps during monitor startup/storage.
Page 6 CAUTION English The exclamation point within an equilateral triangle and "CAUTION" are intended to alert the user to the presence of important operating instructions. Failure to heed the instructions can result in injury or material damage. DO NOT BLOCK VENTS OR RADIA- TOR PANELS.
Page 7: Table Of Contents
Precautions ... 9 Basic Operation Detaching the Front Panel ... 13 Attaching the Front Panel ... 14 Initial System Start-Up ... 15 Turning Power On and Off ... 16 Subwoofer On and Off ... 17 Adjusting Volume/Bass/Treble/Balance (Between Left and Right)/Fader (Between Front and Rear) ... 18 Setting Bass Frequency ...
Page 8 Précautions ... 9 Fonctionnement de base Retrait du panneau avant ... 13 Pose du panneau avant ... 14 Mise en service de l'appareil ... 15 Mise sous et hors tension ... 16 Mise en et hors service du subwoofer ... 17 Réglage du volume/graves/aigus/balance droite-gauche/balance avant-arrière ...
Page 9 Precauciones ... 9 Operación básica Extracción del panel frontal ... 13 Fijación del panel frontal ... 14 Puesta en funcionamiento inicial del sistema ... 15 Conexión y desconexión de la alimentación ... 16 Activación y desactivación del altavoz de subgraves ... 17 Ajuste del volumen/los graves/los agudos/el equilibrio entre los altavoces derechos e izquierdos/el equilibrio entre los altavoces delanteros y traseros ...
Page 10: Precautions
Mantenimiento Si tiene problemas, no intente reparar la unidad por sí mismo. Devuélvala a su proveedor Alpine o a la estación de servicio Alpine para que se la reparen.
Page 11: Inserting Discs
Precautions Never Attempt the Following Do not grip or pull out the disc while it is being pulled back into the player by the automatic reloading mechanism. Do not attempt to insert a disc into the unit when the unit power is off. Inserting Discs Your player accepts only one disc at a time for playback.
Page 12 Precautions English Bumps Résidus Abultamientos New Discs As a protective measure to prevent the CD from jamming, the CD player will automati- cally eject discs with irregular surfaces or inserted incorrectly. When a new disc is inserted into the player and ejected after initial loading, using your finger, feel around the inside of the center hole and outside edge of the disc.
Page 13 à des chocs. Precauciones Français Ubicación de instalación Cerciórese de no instalar el CDA-7944R/ CDA-7842R en un lugar sometido a: La luz solar directa ni el calor Gran humedad y agua Polvo excesivo Vibraciones excesivas Manejo del panel frontal desmontable No lo exponga a la lluvia ni al agua.
Page 14: Detaching The Front Panel
Detaching the Front Panel Press the PWR (Power) button to turn off the power. Press the Release ( ) button at lower left corner until the front panel pops out. Grasp the left side of the front panel and pull it out. Notes: The front panel may become hot under normal usage (especially...
Page 15: Attaching The Front Panel
Attaching the Front Panel 1. First, insert the right side of the front panel into the main unit. Align the 2 small holes on the front panel with the 2 projections on the main unit. 2. Push the left side of the front panel until it locks firmly into the main unit.
Page 16: Initial System Start-Up
Initial System Start-Up Immediately after installing or applying power to the unit, it should be initial- ized. To do this, first, remove the detachable front panel. Behind the front panel, to the right of the connector, there is a small hole. Using a pencil or other pointed object, press the red reset button mounted behind this hole to complete the initialization procedure.
Page 17: Turning Power On And Off
Turning Power On and Off Press the PWR (Power) button to turn on the unit. Note: The unit can be turned on by pressing any other button except the eject c button. The volume level gradually increases to the previous level you were listening to before the unit was turned off.
Page 18: Subwoofer On And Off
Subwoofer On and Off Press and hold the Eject button for at least 3 seconds. With each press, subwoofer is toggled On or Off. Notes: Initial mode is "SUBW OFF." Set to "SUBW OFF" unless the subwoofer is used. When the subwoofer is turned on, the subwoofer output level can be adjusted.
Page 19: Adjusting Volume/Bass/Treble/Balance (Between Left And Right)/Fader (Between Front And Rear)
Adjusting Volume/Bass/Treble/ Balance (Between Left and Right)/Fader (Between Front and Rear) Press the MODE (Audio Control) knob repeatedly to choose the desired mode. Each press changes the modes as follows: Notes: If the MODE (Audio Control) knob is not rotated within 5 seconds after selecting the BASS, TREBLE, BALANCE, or FADER mode, the unit automatically sets...
Page 20: Setting Bass Frequency
Setting Bass Frequency The bass control centre frequency can be set at 60, 70, 80 or 100 Hz. Press and hold the INTLZ button for at least 3 seconds. Press the f UP button repeatedly until the display shows "BC." Each press of the f UP button scrolls the modes as follows: FM-LV...
Page 21: Sound (Beep) Guide Function
Sound (Beep) Guide Function This function will give audible feedback with varying tones depending upon the button pressed. Press and hold the INTLZ button for more than 3 seconds. Press the f UP button repeatedly to select "BEEP." Each press of the f UP button changes the modes as shown.
Page 22: Changing Lighting Color
Appuyez sur la touche de TUNE pour changer la couleur de l'affichage el choisir ANBER OFF (bleu pour le CDA-7944R et vert pour le CDA-7842R) ou AMBER ON (orange). Appuyez sur la touche INTLZ pour valider la couleur de l'affichage.
Page 23: Dimmer Control
Dimmer Control With the head lights of the vehicle ON, setting the illumination control of the vehicle to ON decreases the illumination brightiness of the unit. If the illumination is too bright during the night, set the DIM (Dimmer) to AUTO. Press and hold the INTLZ button for more than 3 seconds.
Page 24: Audio Mute Function
Audio Mute Function Activating this function will instantly lower the volume level by 20 dB. Press the MUTE button to activate the MUTE mode. The audio level will decrease by about 20 dB. Pressing the MUTE button again will bring the audio back to its previous level.
Page 25: Selecting Bbe Mode
Selecting BBE Mode The BBE (Barcus Berry Electronics) processor installed in this unit is de- signed to correct the phase distortion inherent in most loudspeaker designs. Ensuring the phase integrity of the signal driving the speakers improves the accurate reproduction of the sound. Press and hold the MODE (Audio Control) knob for at least 2 seconds to turn on the BBE mode.
Page 26: Turning Mute Mode On/Off
Turning Mute Mode On/Off With a cellular phone or navigation system connected, audio will be inter- rupted whenever a call is received. This function can be manually turned ON or OFF from the head unit by following procedure below. Press and hold the INTLZ button for at least 3 seconds.
Page 27: Demonstration
Dans le mode DEMO, vous pouvez avoir un aperçu de toutes les fonctions des autres appareils (processeur de son, etc.) raccordés au CDA-7944R/CDA-7842R par une liaison Ai-NET. Appuyez pendant au moins 3 secondes sur la touche DEMO pour activer le mode DEMO.
Page 28: Blackout Mode On And Off (Cda-7944R Only)
Blackout Mode On and Off (CDA-7944R only) When the Blackout mode is turned on, the CFL display will turn off to reduce power consumption. This additional power enhances the sound quality. Press and hold the BLACK OUT button for at least 2 seconds to start the blackout mode.
Page 29: Adjusting Source Signal Level
Adjusting Source Signal Level If the difference in volume level between the CD player and FM radio is too great, adjust the FM signal level as follows. Press and hold the INTLZ button for at least 3 seconds. Press the f UP button repeatedly to select "FM-LV."...
Page 30: Digital Output On And Off
Digital Output On and If an optional Digital Phase Processor with the optic digital connector is Ai-NET connected, turn the digital output on or off as described below. Press and hold the INTLZ button for more than 3 seconds. Press the f UP button repeatedly to select "D-OUT."...
Page 31: Manual Tuning
Manual Tuning Press the SOURCE button until a radio frequency appears in the display. Press the BAND button repeatedly until the desired radio band is displayed. Each press changes the band; Press the TUNE button repeatedly until "DX SEEK" and "SEEK" disappear from the display.
Page 32: Automatic Seek Tuning
Automatic Seek Tuning Press the SOURCE button until a radio frequency appears in the display. Press the BAND button repeatedly until the desired radio band is displayed. Each press changes the band; Press the TUNE button to illuminate the DX and SEEK indicators in the display. With the DX mode activated, both strong and weak stations will be tuned in the Auto-Seek operation.
Page 33: Manual Storing Of Station Presets
Manual Storing of Station Presets Select the radio band and tune in a desired radio station you wish to store in the preset memory. Press and hold any one of the preset buttons (1 through 6) for at least 2 seconds until the station frequency on the display blinks.
Page 34: Automatic Memory Of Station Presets
Automatic Memory of Station Presets Press the SOURCE button to select the radio mode. Press the BAND button repeatedly until the desired radio band is displayed. Press and hold the A.ME button for at least 2 seconds. The frequency on the display continues to change while the automatic memory is in progress.
Page 35: Tuning To Preset Stations
Tuning to Preset Stations Press the SOURCE button to select the radio mode. Press the BAND button repeatedly until the desired band is displayed. Press the station preset button that has your desired radio station in memory. The display shows the band, preset number with a triangle and frequency of the station selected.
Page 36: Auto Station Search While Traveling
Auto Station Search While Traveling This function will automatically search for up to 12 stations receivable in the region you are in and store them in temporary memory. Use this function when you are traveling in a region away from home. Press the BAND button repeatedly until the desired radio band is displayed.
Page 37: Setting Rds Reception Mode And Receiving Rds Stations
The RDS (Radio Data System) is a radio information system using the 57 kHz subcarrier of regular FM broadcast. The RDS allows you to receive a variety of information such as traffic information, station names, and to automatically re- tune to a stronger transmitter that is broadcasting the same programme.
Page 38 Press the AF button to deactivate the RDS mode. Tips The RDS digital data includes the followings: Programme Identification Programme Service Name List of Alternative Frequecncies Traffic Programme Traffic Announcement Programme Type Enhanced Other Networks R.TEXT Radio Text Information English Appuyez sur la touche AF pour annuler le mode RDS.
Page 39: Recalling Preset Rds Stations
Recalling Preset RDS Stations Press the AF button to activate the RDS mode. The display shows "AF" when the RDS mode is activated. Press the preset location button in which your desired RDS station is preset. If the preset station's signal is weak, the unit automatically searches and tunes to a stronger station in the AF (Alternative Frequencies) list.
Page 40 English If the signal level of the Regional (Local) station being tuned becomes too weak to receive, press the same preset location button to tune in a Regional station in other district. Note: For presetting the RDS stations, refer to the Radio Operation section.
Page 41: Receiving Rds Regional (Local) Stations
Receiving RDS Regional (Local) Stations Press and hold the INTLZ button for at least 3 seconds to activate the setting mode. Press the f UP button repeatedly to select "REG" Each press of the f UP button scrolls the modes as shown. FM-LV PTY31 MUTE...
Page 42: Receiving Traffic Information
Receiving Traffic Information Press the T.INFO button to activate the Traffic Information mode. Press the DN g or f UP button to select your desired traffic information station. When a traffic information station is tuned in, the TP indicator lights up. Traffic information is heard only when it is being broadcast.
Page 43 Notes: If the traffic information broad- cast signal falls below a certain level, the unit remains in the receiving mode for 1 minute. If the signal remains below a certain level for over 1 minute, the "T.INFO" indicator blinks. If you do not want to listen to the traffic information being received, lightly press the T.INFO button to skip that traffic information...
Page 44: Pty (Programme Type) Tuning
PTY (Programme Type) Tuning Press the "F" button. The FUNC indicator will illuminate. Press the PTY button to activate the PTY mode. The Programme Type of the station being currently received will be displayed for 5 seconds. If there is no receivable PTY broadcast, "NONE"...
Page 45 Press the PTY button within 5 seconds after selecting the programme type to start searching for a station in the selected programme type. The chosen programme type indicator blinks during searching and lights when a station is found. If no station is found, "NO PTY" will be displayed for 5 seconds.
Page 46: Receiving Traffic Information While Playing Cd Or Radio
Receiving Traffic Infor- mation While Playing CD or Radio Press the T.INFO button repeatedly until the T.INFO indicator appears in the display. Press the DN g and f UP buttons to select a traffic information station if necessary. When a traffic information broadcast starts, the unit automatically mutes the CD player or the regular FM broadcast.
Page 47 When traffic information stations cannot be received: In the tuner mode: When the TP signal can no longer be received for over 1 minute, the "T.INFO" indicator blinks. In the CD mode: When the TP signal can no longer be received, the traffic information station of another frequency will be selected automatically.
Page 48: Priority Pty (Programme Type)
Priority PTY (Programme Type) This function allows presetting of a programme type such as music category, news, etc. You can listen to a pro- gramme in the preset programme type as the unit automatically gives priority to the preset programme type when it begins broadcasting, and interrupts the pro- gramme you are currently listening.
Page 49 Press the DN g or f UP button within 5 seconds while "NEWS" is being displayed to choose a desired programme type. Then press P.PTY button. The PRIORITY PTY function will activate. Press the P.PTY button to activate the PRIORITY PTY mode again. To change the programme category, perform the step 3.
Page 50: Turning Emengency Alarm On Or Off
Turning Emergency Alarm On or Off Press and hold the INTLZ button for at least 3 seconds. Press the f UP button repeatedly to select "PTY31" Each press of the f UP button scrolls the modes as shown. FM-LV PTY31 D-OUT MUTE BEEP...
Page 51: Displaying Radio Text
Displaying Radio Text Text messages from a radio station can be displayed. Tune in a radio station that transmits text messages. Press the F button. The FUNC indicator illuminates. Press the R.TEXT (Radio Text) button to activate the Radio Text mode. The display shows "R/T WAIT"...
Page 52 Press the F button to return to the normal operation mode. The FUNC indicator disappears from the display. Notes: If there is no receivable text message or the unit cannot receive a text message properly, the display shows "NO TEXT" for 2 seconds.
Page 53: Inserting/Ejecting Disc
Inserting/Ejecting Disc Insert a CD half way into the slot with the label side facing up. The player automati- cally draws the disc into the disc compart- ment. The Disc indicator in the display appears to show that a disc is loaded. Note: Three-inch (8cm) CD's cannot be used.
Page 54: Normal Play And Pause
Normal Play and Pause Lecture normale et Insert a CD. The CD player begins playback from the first track on the disc. The display shows the track number and elapsed time of the track being played. When the last track is played back the player returns to the first track and begins playback from that point.
Page 55: Music Sensor (Skip)
Music Sensor (Skip) Momentarily press the DN g button once during CD play to return to the beginning of the current track. If you wish to access a track further back, repeatedly press until you reach the desired track. Press the f UP button once to advance to the beginning of the next track.
Page 56: Repeat Play
Repeat Play Press the RPT button to play back repeatedly the track being played. The RPT indicator appears and the track will be played repeatedly. RPT ALL Press the RPT button again and select OFF to deactivate the repeat play. Note: If a CD Shuttle is connected and the RPT ALL mode is selected, the unit repeatedly plays back all tracks on...
Page 57: Random) Play
M.I.X. (Random Play) Press the M.I.X. button in the play or pause mode. The M.I.X. indicator will illuminate and the tracks on the disc will be played back in a random sequence. After all the tracks on the disc have been played back once, the player will begin a new random sequence play until the M.I.X.
Page 58 English Notes: In case a 6-disc CD Shuttle is con- nected: Press the "F" button to illuminate the "FUNC" (Function) indicator and go to step 1 within 5 seconds. In case a 12-disc CD Shuttle is con- nected: Press the "F" button twice to illuminate the "FUNC"...
Page 59: Scanning Programmes
Scanning Programmes Press the SCAN button to activate the Scan mode. The first 10 seconds of each track will be played back in succession. To stop scanning, press the SCAN button to deactivate the Scan mode. Notes: In case a 6-disc CD Shuttle is con- nected: Press the "F"...
Page 60: Displaying Cd Titles
Normal and CD Title with each press of the TITLE button (see example below). (Refer to page 60 to title the disc.) 11'03 - - - - - - - - ALPINE Title not entered Titre non mémorisé Título sin memorizar Title entered Titre mémorisé...
Page 61: Titling Discs
Titling Discs Press the TITLE button to display the disc title. (Refer to page 59). Press and hold the TITLE button for at least 3 seconds. The first digit will blink. Rotate the MODE (Audio Control) knob to select the desired letter/numeral/symbol available for naming.
Page 62 Repeat the steps 3 and 4 above to complete the titling. Pressing the MODE (Audio Control) knob after entering the eighth character, automatically stores the title into memory. When entering a title of less than 8 characters (for example, 3 character title): After entering 3 characters to complete your title, the 4th character space will be blinking.
Page 63: Erasing Disc Title
Erasing Disc Title Press the TITLE button to select the disc titling mode. Then, press and hold for at least 3 seconds. Press and hold the SOURCE button for at least 3 seconds to activate the title scanning mode. The title in the display will blink.
Page 64: Cd Shuttle Operation
Controlling CD Shuttle (Optional) An optional 6-disc or 12-disc CD Shuttle may be connected to the CDA-7944R/CDA-7842R if it is Ai-NET compatible. With a CD Shuttle connected to the Ai-NET input of the CDA-7944R/CDA- 7842R, the CD Shuttle will be controllable from the CDA-7944R/CDA-7842R.
Page 65 Notes: After selecting the desired disc, you can operate in the same way as for the CDA-7944R/CDA-7842R CD player. For details, please see the CD Operation section. If the FUNC indicator is illuminated the Disc Select buttons become nonfunctional. When a 12-disc CD Shuttle is connected:...
Page 66: Searching For Titled Discs
Searching for Titled Discs You can search for CDs with their titles if they are titled. (To title CDs, refer to "Titling Discs" on pages 60 and 61.) Press and hold the T.S.M. button for at least 2 seconds while a CD title is dis- played.
Page 67: Controlador Remoto
Multi-Changer Selection Alpine's Ai-NET system will support up to 6 CD Shuttles. When operating two or more changers, the KCA-400C (Multi- Changer Switching device) must be used. If you use 1 Switching device, you can connect up to 4 CD Shuttles. If you use 2 Switching devices, you can connect up to 6 CD Shuttles.
Page 68 The CD Shuttle Selection mode remains active for 3 seconds after Step 2 is performed. Press the BAND button until the desired CD Shuttle indicator appears on the display. Note: If the selected CD Shuttle is not connected, the display will show "NO CHGR-X."...
Page 69: Remote Control
Controls on Remote Control (RUE-4185 supplied) 1 Mute Button Press the button to lower the volume by 20 dB instantly. Press the button again to cancel. 2 Power Switch Press the switch to turn the power on/off. 3 -/J Button Press the button to switch between the Play and Pause modes for CD.
Page 70 7 8 Button Radio mode: Pressing the button will select, in ascending order, stations programmed into the radio's presets as shown below. 1 2...6 CD Shuttle mode: DISC Select (UP) Button Press the button to select a disc in ascending order. 8 g Button Radio mode: SEEK (DN) Button CD mode: Press the button to go back to the beginning...
Page 71 ! 9 Button Radio mode: Pressing the button will select, in descending order, stations programmed into the radio's presets as shown below. 6 5...1 CD Shuttle mode: DISC Select (DN) Button Press the button to select a disc in descending order. "...
Page 72: Battery Replacement
Battery Replacement Applicable battery: Use two "AAA" sized dry batteries or equivalent. Opening the battery cover Slide out the battery cover while firmly pressing outward. Replacing the battery Put the batteries in the case observing the polarities as illustrated. Closing the cover Push the cover as illustrated until a click is heard.
Page 73: Disc Care
Using such accessories can cause the disc to be out of standard specifications and may create operational problems. We recommend not using these accessories on discs played in Alpine CD players. INCORRECT CORRECT INCORRECTE...
Page 74: In Case Of Difficulty
Ce guide devrait vous aider à résoudre tout problème provenant de l'appareil. Sinon, vérifiez les connexions du reste du système ou consultez un revendeur Alpine autorisé. Fonctions inopérantes ou pas d'affichage. La clé de contact du véhicule est sur la position d'arrêt.
Page 75 In Case of Difficulty Unable to receive stations. No antenna or open connection in cable. – Make sure the antenna is properly connected; replace the antenna or cable if necessary. Unable to tune stations in the seek mode. You are in a weak signal area. –...
Page 76 In Case of Difficulty English Broadcast is noisy. The antenna is not the proper length. – Extend the antenna fully; replace it if it is broken. The antenna is poorly grounded. – Make sure the antenna is grounded properly at its mounting location. CD Player/Shuttle not function- ing.
Page 77 8 cm Vous n'avez pas utillsé l'adaptaleur de CD de 8 cm – Fixiz l'adaptateur recommandé par Alpine au CD de 8 cm avant de l'insérer dans le chargeur de disques. Français El disco no avanza ni retrocede. El disco compacto está dañado.
Page 78 – El indicador desaparecerá cuando la temperatura vuelva a la gama de operación. Mal funcionamiento del cambiador de discos compactos. – Consulte a su proveedor Alpine. Presione el botón de expulsión del cargador y extraiga éste. Compruebe la indicación. Vuelva a insertar el cargador.
Page 79 In Case of Difficulty Indication for CD Shuttle A disc is left inside the CD Shuttle. – Press the Eject button to activate the eject function. When the CD Shuttle finishes the eject function, insert an empty CD magazine into the CD Shuttle to receive the disc left inside the CD Shuttle.
Page 80: Specifications
Power Requirement ... 14.4 V DC (11–15 V allowable) Maximum Power Output* CDA-7842R only ... 40 W Continuous Power Output** CDA-7842R only ... 19 W Output Voltage ... 500 mV/10k ohms Bass ... ±14 dB at 60 Hz Treble ... ±14 dB at 10 kHz Weight ...
Page 81: Spécifications
Alimentation ... 14,4 V CC (11 – 15V permissible) Sortie max. d'alimentation CDA-7842R uniquement ... 40 W Puissance de sortie continue** CDA-7842R uniquement ... 19 W Tension de sortie ... 500 mV/10k ohms Graves ... ±14 dB/60 Hz Aigus ... ±14 dB/10 kHz Poids ...
Page 82: Especificaciones
Alimentación ... 14,4 V CC (11 – 15 V permisible) Salida máx. de alimentación CDA-7842R solamente ... 40 W Salida de potencia continua** CDA-7842R solamente ... 19 W Tensión de salida ... 500 mV/10k ohms Graves ... ±14 dB/60 Hz Agudos ...
Page 83: Index
A - C Adjusting Source Signal Level ... 28 Adjusting Volume/Bass/Treble/Balance (Between Left and Right)/Fader (Between Front and Rear) ... 18 Attaching the Front Panel ... 14 Audio Mute Function ... 23 Auto Station Search While Traveling ... 35 Automatic Memory of Station Presets ... 33 Automatic Seek Tuning ...
Page 84: Réception Des Informations Routières Pendant La Lecture Cd Ou L'écoute De La Radio
A - C Accord manuel ... 30 Accord d'une station préréglée ... 34 Accord par recherche automatique ... 31 Accord PTY (Type de programme) ... 43 Affichage alphanumérique ... 50 Affichage du titre d'un CD ... 59 Balayage des plages ... 58 Changement de la couleur de l'éclairage ...
Page 85: Índice Alfabético
A - B Activación y desactivaciõn de la salida digital ... 29 Activación y desactivación del altavoz de subgraves ... 17 Activación y desactivación del modo de obscurecimiento (CDA-7944R solamente) ... 27 Activación/desactivacion de la alarma de emergencia ... 49 Activación/desactivación del modo de silenciamiento ...

This manual is also suitable for:

Cda-7944r

Alpine CDA-7842R Owner's Manual

English

French

Spanish

Galician

Quick Links

Related Manuals for Alpine CDA-7842R

Summary of Contents for Alpine CDA-7842R

This manual is also suitable for:

Table of Contents