Table of Contents
Advertisement
Text Scroll Setting
Setting the Scroll
The text messages in the audio screen are scrolled.
Setting item: Text Scroll
Setting contents: OFF (Initial setting) / ON
OFF: Turns off the scroll mode.
ON:
Turns on the Auto scroll mode. Scroll display is repeated
while the vehicle is parked.
Key Sound Setting
Adjusting the Operating Sound
You can change the volume of the sound heard when a button is
touched.
Setting item: Touch Sound Feedback
Setting contents: 0 to 7 (Initial setting: 4)
Setting Mute when Reversing
You can set whether to mute the playing music when the gear lever is
moved to the reverse (R) position.
Setting item: Mute while backing up
Setting contents: OFF (Initial setting) / ON
Screen/Lighting Setting
Setting the Brightness of the Backlighting
Backlighting is provided by LEDs behind the liquid crystal panel. The
illumination control adjusts the brightness of the backlighting based on
the car's ambient lighting for easier viewing.
Setting item: Dimmer
Setting contents: Auto (Initial setting) / On / Off
Auto:
Adjust the brightness of the background illumination of
the monitor automatically to the brightness of the car
interior.
On:
Keep the background illumination of the monitor dark.
Off:
Deactivate Auto Dimmer mode to keep the background
illumination of the monitor bright.
• When "Auto" or "On" is set, the setting is also applied for the button
lighting in "Button Backlighting Adjustment" (page 21), and
"Display Backlighting Adjustment" (page 21).
Button Backlighting Adjustment
You can adjust the brightness of the button lighting at night with the
dimmer.
Setting item: Key Illumination Level
Setting level: -2 to +2 (Initial setting: 0)
Display Backlighting Adjustment
You can adjust the brightness of the backlight. This function could be
used, for instance, to change the screen brightness while traveling at
night.
Setting item: Screen Dimmer Level
Setting content: -15 to +15 (Initial setting: 0)
You can adjust the level between MIN (-15) and MAX (+15).
When it reaches the minimum or maximum point, the display
shows "MIN" or "MAX" respectively.
Changing the Opening Image
You can set the image file for the opening screen. Copy your desired
image file from a Flash Memory device.
Setting item: Opening Customization
Setting contents: Default (Initial setting) / User
The file selected in the User mode will be copied according to the
following procedure.
1
Connect the Flash Memory device which contains
the BMP file to be copied to the unit.
2
After the confirmation message is displayed, touch
[OK].
The Opening image is changed.
Compatible image files
BMP
File format:
Image size:
800 × 480 pixels, RGB 24 bit or less
Folder Name:
OPENINGFILE
File Name:
openingfile.bmp
About iLX-107
Touch [About] on the General setup menu in step 3. Refer to "General
Setup Operation" (page 20).
Displaying the Product Information
You can view the model name, serial number, version information of
this product and BLUETOOTH information. Make note of the version
information and refer to it whenever you contact Alpine Tech Support or
an Alpine-authorized dealer.
Contents: iLX-107 (model name) / Serial Number / Firmware
Version / Bluetooth Device Name / Bluetooth Device
Address
21
-EN
Advertisement
Table of Contents
