6.2.1 Functions
Name
1) Function screen switchover Used to switch between the function (parameter setting, monitoring, diagnostics, mail) displays.
2) Operation mode switchover
3) Operation mode indication
4) Information
5) Software version
6.2.2 Parameter setting
Name
All List Format
Functional List Format Used to display specific parameters on a function-by-function basis.
6)
Individual List Format Used to list the frequently used parameters or necessary parameters freely.
Basic Settings
6.2.3 Parameter No and range
Name
Parameter No
7)
Range
6.2.4 Parameter setting button
Refer to page 18 for details of the parameter setting button 8)
U sed to sw itch betw een the operation m odes (E XT, LN K). (Refer to page 48 for operation m ode of the inverter.)
EXT: External operation mode
LNK: Network operation mode (Ethernet communication mode)
(Note) will result in an error in the PU operation mode
Indicates the current operation mode.
EXT: External operation, PU: PU operation, EXT JOG: external JOG operation, PU JOG: PU JOG
operation, LNK: Network operation mode (Ethernet communication mode), PU EXT: PU-external
combined operation. (Note) The operation mode will not be changed, if the PU and such other than
Ethernet software was used to change the operation mode.
Shows the current condition, e.g. input error. (Refer to page 47 for error indications.)
The software version is displayed on the title label of the Web browser.
Used to display all parameters.
U sed to set the operation specifications roughly w ithout a need to know the specific param eters.
Shows the parameter number of the selected parameter.
Shows the setting range of the selected parameters.
SOFTWARE START AND SCREEN DESCRIPTION
Description
Description
Description
16
Refer to Page
18
19
21
23