3.4 General Procedure
Start
Get the IP address (sub-network mask, gateway address as necessary) for the inverter from the network
Get the IP address (sub-network mask, gateway address as necessary) for the inverter from the network
manager.
manager.
Set Pr. 434 to Pr. 437 (IP address) with the operation panel (FR-DU04-1). (Also set the sub-network mask
and gateway address parameters as required.)
Power on after powering off the inverter once or reset the inverter. The IP address setting of the inverter is made
valid after a power-on reset. (Refer to the inverter manual for inverter reset.)
Start the Web browser on the personal computer and enter the IP address set to the inverter to read the screen.
.....
End
(Refer to page 9.)
(Refer to page 14.)
8
OPERATION OVERVIEW