Table of Contents
Advertisement
OPERATION OVERVIEW
3.2 Cable Specification
Connect the option unit (FR-V5NE) to the Ethernet using the LAN cable indicated below.
Cable used:
Maximum wiring length:
3.3 Precautions for System Configuration
1)
Access to the Internet must be fully safeguarded.
Consult the network access provider, Internet service provider or network manager (person who does
network planning, IP address management, etc.).
We have no liability for any system problems that occur at the time of access to the Internet.
2)
Pr. 466 "password" (Refer to page 10.) is the password used only to log in to the inverter, and does not
prevent illegal access completely. Take other preventive measures when safety must be secured.
Use cables whose category is TPCC3 (Twisted Pair Communication Cable for
LAN Category 3)
or higher and shape is UTP(Unshielded Twisted Pair).
(according to the10BASE-T(IEEE802.3) standard)
The maximum length between HUB and card is 100m. (according to the
10BASE-T(IEEE802.3) standard)
7
Advertisement
Table of Contents
