Installation; Pre-Installation Instructions - Mitsubishi Electric FR-V5NE-E Instruction Manual

2.INSTALLATION

2.1 Pre-Installation Instructions

Make sure that the input power of the inverter is off.
With input power on, do not install or remove the option unit. Otherwise, the inverter and
option unit may be damaged.
2.2 Installation
(1) Remove the inverter front cover refering to the inverter manual.
(2) Install the option unit to Slot 3.
(3) Insert the option unit connector into the Slot 3 connector of the inverter securely. At this time, also insert
the option fixing holes securely.
Refer to the following diagram for the position of Slot 3. Push the option unit securely into the option
fixing hook.
(4) Fix the two right and left places of the option unit to the inverter securely with the accessory mounting
screws. If the screw holes do not line-up, the connector may not have been inserted securely. Check
for insecure insertion.
(5) Remove the option wiring port cover (DATA PORT) from the inverter front cover by pushing it from the
back of the front cover, then fit the dedicated option cover on the front cover and reinstall the front
cover.
CAUTION
3