Diagnostics; Vfd Status - Mitsubishi Electric FR-V5NE-E Instruction Manual

10. DIAGNOSTICS

The output current, output voltage and other data are monitored at fixed intervals.

10.1 VFD Status

No. Name
1) Monitor Value
2) Absolute Value/%
3) Hold/On Hold
4) Monitor Start/Stop
5) Alarm Display
5)
Shows the monitor value.
Used to switch the monitor display unit of the output current, output voltage or DC bus
voltage between the absolute value and %.
When the display unit is the absolute value, this button acts as the "%" button, and when
the display unit is %, this button acts as the "Absolute Value" button.
(N ote) F or % disp lay, fu ll sca le value is disp laye d as 10 0% . (R e fe r to pag e 34 fo r fu ll sca le valu e.)
Used to hold the data being monitored. Valid only during monitoring.
During hold, this button acts as the "On Hold" button, and clicking it cancels hold.
Monitoring is also performed during hold.
Used to start monitoring. During monitoring, this button acts as the "monitor stop" button.
Displays alarm descriptions when an alarm occurs in the inverter during monitoring.
1)
2)
3)
Description
44
4)