Bias/Gain Of Speed Setting Voltage (Current) - Mitsubishi Electric FR-V5NE-E Instruction Manual

7.6 Bias/Gain of Speed Setting Voltage (Current)

Pressing [Click] in the Change Value field of any of Pr. 902 to Pr. 905 and Pr. 917 to Pr. 920 on the
parameter setting page displays the following page. For details, refer to the inverter manual (basic) and
make setting.
(1) Choose the adjusting method from the following ones.
• Calibration without application of voltage.
• Calibration with application of voltage (Refer to page 27.)
• Calibration at any point without application of voltage (Refer to page 28.)
Choose the adjusting method "Without the voltage source" (1)) and set the Setting Speed (2)). Clicking
the "OK" button writes the speed to the inverter.
1)
2)
26
PARAMETER SETTING