Inverter Operation Mode - Mitsubishi Electric FR-V5NE-E Instruction Manual

INVERTER SETTING

4.2 Inverter Operation Mode

Change the operation mode to the network operation mode to write, initialize, or reset parameters with the
FR-V5NE. When changing to the network operation mode, set
external operation mode. (It is not necessary to set Pr. 79 in the factory-set condition
and monitoring with Ethernet software can be performed in any operation mode.)
(1) Switch over with Ethernet software
After starting of Ethernet software, select network operation mode by the operation mode switching
button. (Refer to page 15.)
" link startup mode selection "
(2) Pr. 340
Power on the inverter in the network operation mode with
REMARKS
" Inverter operation mode " for the inverter operation mode.
Refer to Appendix
" 0, 2, 6, 7, or 8 " in Pr. 79 to change to the
" 1 " set in Pr. 340. (Refer to page 50.)
11
. Parameter reading